Forum Replies Created
-
AuthorPosts
-
Dave_Conway
ParticipantRe: OVEN STAT 47TH21J5
OK, assuming it has a UK shaft size (Matron 😯 ) and a single nut 😆 fixing and a standard 3 tag connection for temp control. It will only need, being a main oven stat a maximum of two o/c switches on the front switch block, my guess goes with Masterpart’s BL14102
And you can blame Gegsy for the carry on inuendo, he just embedded it in to my mind with a PM about the lady in the public forums wanting a new knob :rotl:
Dave.
Dave_Conway
ParticipantRe: brandt freezer
PCB is part number 45X9781, price varies from £30 – £40 depending on where you get it from 😉
One thermistor is 45X2952 (£11 – £22) and the other is 45X6614 (£10 – £15)
All trade prices.
Dave.
PS, Moved post to the trade area 😉
Dave_Conway
ParticipantRe: Problem with the knob on my Diplomat oven
Just a new knob required I would say Sarah.
Reasonable enough at £9.36 inc, I can order no problem, if you’d like one an email to spares@ukwhitegoods.co.uk please 🙂
Dave.
Dave_Conway
ParticipantRe: Schreiber Door Hinge
Longun wrote:The bottom left hinge is worn out please could you supply the part number that will fit so that I can order one from yourselfs
Indeed I can 😀
The lower left is part number 246009800 which you can see/purchase HERE
Dave.
Dave_Conway
ParticipantRe: Indesit dishwasher (DV620)
Part number C00076659 (pos 19 on the diagram Jim, I had to do a part description search to find it though 😕 )
Cheap enough at £8.77 inc, an email to spares@ukwhitegoods.co.uk please if you’d like one ordered 🙂
Dave.
Dave_Conway
ParticipantRe: Tumble Dryer with a compressor!!!
You didn’t get the model number by any chance Phil did you ?
Dave.
Dave_Conway
ParticipantRe: Diplomat APL8212 Door seal
31X2477 Geoff 🙂
Dave.
Dave_Conway
ParticipantRe: servis m6160 pump
It certainly sounds like the pump, quite a common occurance the screeching noise.
You can get one HERE if you need one 🙂
Power off when checking please :zap:
If your husband isn’t confident about fitting, an engineer can be found in the repairs@ link below.
Dave.
Dave_Conway
ParticipantRe: OVEN STAT 47TH21J5
maltheviking wrote:A extortionate price is being asked for the genuine 😡
😯 😯
Just a tad.
What’s the shaft size, contact arrangement and fixings Mal ?
Dave.
Dave_Conway
ParticipantRe: hotpoint (GDA) d/washer pt no. for btm seal please
Part number 1801629 about a tenner trade, in stock at Connect, but….
Before you order it, check the lower spray arm for a split down the seam which causes the door to leak, it’s a Brandt and a known fault 😉
Dave.
Dave_Conway
ParticipantRe: Help need part numbers for Rosieres 2040DB
Jackal wrote:That should keep my good friend Dave C busy for a short while. 😀 😀
It won’t I’m afraid, all the 2040 information has been removed now, a call to GIAS is the only solution – 0870 9502943
The 4040 comes as a kit so I would assume the 2040 does as well.
Sorry 🙁
Dave.
Dave_Conway
ParticipantRe: Brandt COA380AU on but not working
I can get it for you no problem, an email to spares@ukwhitegoods.co.uk with the model number please and I’ll get prices etc 🙂
Dave.
Dave_Conway
ParticipantRe: Hoover AAA140/01 Error Code 3
Yes, that’s the one Laurence 🙂
Dave.
Dave_Conway
ParticipantRe: electrolux oven cold + how long to deliver parts?
Yep, that’s the one, same day/next day dispatch normally depending on the time the order is placed.
The bulb will either be the 15w or 25w small one, check the existing one, it will be stamped on the glass normally but if you’re not sure, order the 15w one 🙂
Dave.
Dave_Conway
ParticipantRe: white westinghouse spares
It’s probably a Nardi, spares from Qualtex and Masterpart.
There may be a pattern element but I’ll check when you have the model 🙂
Dave.
-
AuthorPosts
