[DDSDDS]

Re: Golden Oldies

the repair i did was a mains filter it had blown up looked like confetti inside took ages to clean but new one fitted years ago still see lady she lives local so i assume stilll kicking

[DDSDDS]

Re: Golden Oldies

oldest machine i ever ever worked on was a hotpoint 1800 i think it wa called smallish thing with the tiniest workspace ever inside it
was for a lovely old lady who could not fit anything bigger in
then i am only 23

[DDSDDS]

Re: my tumble dryer not tumbling!!!!

cc when you try to turn the drum by hand is it jammed or is it moving but slowly
if it is jammed then it is going to be either drum support and back snapped
something blocking the fan from turning therefore stopping the whole thing
if it does turn slowly by hand then it will be the capaciter and you aslready know where to get one of those
in my experience capaciter almost every time

[DDSDDS]

Re: INDESIT WE14 ERROR F-01 & DRUM CATCHING

if the noise is in one place only it could be something catching inside the drum bra wire coin bent heater belt buckle anything really but with the f 01 fault as well prob worth calling in the pros

[DDSDDS]

Re: Hoover H160E-UK drum not rotating

specific to the one at the bottom i am afraid prob motor itself is faulty
unless the brushes are incorrectly fitted

[DDSDDS]

Re: Hoover H160E-UK drum not rotating

off the top of my head i cant remember but is this the version with the pcb in the little white plastic housing on the bottom left if so whn th brushes go it tends to damage that module and some soldering on one of the relay joints is required it is normally hard to spot but if you look close it could be that please unplug and watch your fingers washing machines are cheap compared to losing a digit or 4
if in doubt ask for an engineer there is a link here for your area

[DDSDDS]

Re: creda first choice tcr13

ta iadom but its done tub out and working 😛

[DDSDDS]

Re: creda first choice tcr13

ta dave all working now lady can have her dryer back on monday the stat was charred around the contacts so must have been intermitently cutting out thanx very much

[DDSDDS]

Re: Indesit IDL500(in the pink)

🙂

[DDSDDS]

Re: creda first choice tcr13

i think i shall hang my head in shame just walked straight back into workshop for another bash and there winking at me is that bloody stat sorry to doubt you dave
i shall bend over and await your foot up my arse 😳 😳 😳 😳

[DDSDDS]

Re: creda first choice tcr13

hi got tub out looking all over and eithe ri have my eyes shut or there is not stat on front mounting have traced all wires cant see anything at all
did i mention it was a condensor 😳
i dont think i did any other ideas?

[DDSDDS]

Re: creda first choice tcr13

ta sir dave of clubworth will have a look and let u know

[DDSDDS]

Re: tight customers

this could be good folks keep em coming what have you done to coax payment from a tightarse
what have they said not to pay
have you heard about the grandad in somewhereelseville
that just died and therefore means they cant pay
or the one about sorry aint got no cash aint been to the machine
or my classic one (our company rent machines 5 quid a week)

aint got no money this week
says mr bottle of cider 20 pack of lager car outside fag in hand and sky dig on tv nike clothes baseball cap and all the “bling”
with no job

[DDSDDS]

Re: Hotpoint Wma 40 buttons

if it is the ones by the dial then the sleeved spade should go nearest the chassis of the machine with the unsleeved one going more central
let me know how u get on

[DDSDDS]

Re: Hotpoint, wm53 motor to fast

i would definatly say taco fault
if u have changed the motor and timer
definatly check the wiring between the 2 as if the taco wire is burnt out it will jump right up to spin let me know how you get on

[Author]

Posts