DDSDDS

Forum Replies Created

Viewing 15 posts - 91 through 105 (of 506 total)
1 2 3 … 6 7 8 … 32 33 34
  • Author
    Posts
  • July 20, 2011 at 10:58 am in reply to: White Knight CL847 not drying. #355847
    DDSDDS
    Participant

    Re: White Knight CL847 not drying.

    not that i can think of
    guessing it turned ok witht he damp towels and didnt struggle to start

    July 20, 2011 at 10:44 am in reply to: zenb9750si #355851
    DDSDDS
    Participant

    Re: zenb9750si

    few follow up questions
    what is the time lengtht between defrost and is there and way of changing either time of defrost or the interval also any known test procedure for this machine
    thanks

    July 20, 2011 at 10:05 am in reply to: Hotpoint WT960P not working #355822
    DDSDDS
    Participant

    Re: Hotpoint WT960P not working

    if you are sure that all the wires are in the correct place and that all of them are tight then answer me these questions
    when the display goes dead if you go close to it can you still see any lights there
    have you tried another socket
    does the door remain locked while the display is dead or unlock after a few minutes
    if you unplug it and re plug it does it come straight back on or do you have to leave it unplugged for a bit

    July 18, 2011 at 9:56 am in reply to: Bosch Dishwasher Fire! #355706
    DDSDDS
    Participant

    Re: Bosch Dishwasher Fire!

    oddball

    July 13, 2011 at 11:13 am in reply to: raw appliances #320289
    DDSDDS
    Participant

    Re: raw appliances

    if you have any left let me know

    July 12, 2011 at 8:47 am in reply to: Hotpoint WF860..F07 or not??? #354613
    DDSDDS
    Participant

    Re: Hotpoint WF860..F07 or not???

    that rings a bell micky i have had that too randomly throughout the cycle on wt960

    July 7, 2011 at 12:07 pm in reply to: BEKO WMA667 #354739
    DDSDDS
    Participant

    Re: BEKO WMA667

    seen a few beko magnets cracked in half on these
    its quite common and as far as i know they come complete with the motor
    i would be having the motor off before ordering anything

    July 5, 2011 at 10:32 am in reply to: Added to my watch list. #354721
    DDSDDS
    Participant

    Re: Added to my watch list.

    tomorrow there will be 500 firepits on sale from ukw members

    July 5, 2011 at 10:30 am in reply to: BEKO WMA667 #354737
    DDSDDS
    Participant

    Re: BEKO WMA667

    tacho magnet broke

    July 5, 2011 at 9:46 am in reply to: Hoover AM110 Spinning problems #354731
    DDSDDS
    Participant

    Re: Hoover AM110 Spinning problems

    coin in pipe leading to the pump housing will cause this

    July 5, 2011 at 9:09 am in reply to: Hotpoint WF860..F07 or not??? #354611
    DDSDDS
    Participant

    Re: Hotpoint WF860..F07 or not???

    gremlins

    July 4, 2011 at 9:43 am in reply to: beko wma 520 drum #354586
    DDSDDS
    Participant

    Re: beko wma 520 drum

    i have had lots of bekos with loose or missing bottom weights either that or the motor just falls off

    July 4, 2011 at 9:40 am in reply to: hotpoint wf645 #354652
    DDSDDS
    Participant

    Re: hotpoint wf645

    make sure the drawer is clean and the top where the water sprays in also turn the water pressure down and make sure the machine is not leaning forwards on its feet

    July 4, 2011 at 9:39 am in reply to: Hotpoint WF860..F07 or not??? #354609
    DDSDDS
    Participant

    Re: Hotpoint WF860..F07 or not???

    i dont suppose it coulld be a water temp problem something like it is filling with warm water and causing it to get confused?
    just a guess

    June 30, 2011 at 2:18 pm in reply to: Hilarious Appliance Videos #353966
    DDSDDS
    Participant

    Re: Hilarious Appliance Videos

    i think i got shocked by the damn thing and thrown 8 ft??
    did anyone see him actually touch it or do we think it made a loud bang and he just shit hiself?

  • Author
    Posts
Viewing 15 posts - 91 through 105 (of 506 total)
1 2 3 … 6 7 8 … 32 33 34