[delta01]

Re: ise 555 intermittent no spin

which forum ? iadom

[delta01]

Re: ctd00 no motor action

yep it was the timer, funny i gave it a wack b4 initially but no go… however it did on the nxt attempt after i asked you , i ordered one plus stats kit thanks guys

[delta01]

Re: ctd00 no motor action

thanks guys will try your suggestions and report back

[delta01]

Re: wpool fan oven motor

thanks v much mike, found picture of it on connections

[delta01]

Re: save fuel !!!

i stiil wonder if there is anthing in this hho gas generation, there are loads of people making their own , just go to youtube and type in hho generators and how can it be a scam if you can make your own
(very cheaply ) ? and so many seem to be doing it

[delta01]

Re: reset one shot toc

there is a huge difference between shorting out a toc and reseting it, the toc will trip exactly as a new one would, i repeat the most common cause is customer turning off b4 cooling down sequence, (educate customer ) and obviously the engineer would test for other causes of overheating and rectify , my intention was to help, i wish i had never started this subject

[delta01]

Re: reset one shot toc

iv never heard of a late type hotpoint dryer setting on fire for one thing the cabinet is all metal and the drum is also not like the old plastic drum models as i said before the usual cause of toc tripping is customer turning off without allowing cool down or overloading / not cleaning filters

[delta01]

Re: reset one shot toc

its a bi metalic disc how can it be out of calibration ? also the toc that trips is always the left hand one usually because the customer has either opened the door b4 the cool down period or not cleaned the filters etc, or the motor action has failed due to a faulty capacitor etc. the advantage being you dont have to replace the toc with a new set again in a call back situation or a rental situation

[delta01]

Re: LG or samsung Trade suppliers

hi don thanks for the info could you give me the name of the manager /owner and tel. no of the said rental business please ? thanks john

[delta01]

Re: Pop Rivets

hi , have you tried angling the drill at 45 degrees obviously taking care not to slip off i found this works quite well

[delta01]

Re: LG or samsung Trade suppliers

thanks don will check them out, i am trying to source reliable /repairable/reasonably priced rental stock for good existing long term customers

[delta01]

Re: LG or samsung Trade suppliers

finished goods primeraly washing machines, also any reccomendation of specific models appreciated

[delta01]

Re: wma relay

thanks iadom will try your suggestions

[delta01]

Re: a bit of advice

hi i closed my shop over 5 years ago and just worked from home, i have a reasonable income from rentals and i sell new and recon machines ( off the van) plus do selective repairs, any work i dont want i pass on to other engineers, also the rental side seems to be expanding, if you close your shop i would recommend you pay for an advert on the old premises to let your customers know how to find you, i relied on the new owners to leave a sign up but they took it down after a few months, all told though its worked out quite well, i us call divert on the phone for when we are both out, and one of the engineers i pass work on to will cover when i am on holiday , hope this has helped your descision

john

[delta01]

Re: Shop Signs ?

just a thought if you wanted to make your own you can get a custom made vynl type one on the internet i got one for my van both sides and rear for about £140-00 inc vat it came with instructions, dead easy to apply i dont see why you couldnt get them to make you one to stick on a board , unfortunately i cant remember the name of the company but if you seach the internet im sure you will find a cheap supplyer , they even sent me a picture of my type of van with the finished lettering on for approval

[Author]

Posts