[delta01]

Hi again Dave i went back to it and checked the door switch it was ok then i tried turning the top oven regulator i noticed it coulld be turned slightly anti clockwise 11 o clock after that the grill worked could it be just that the oven knob was not fully off due to play in the knob or its a bad connection on the oven switch ?
the customer was happy to use it so we will see what happens thanks again John

[delta01]

Thanks Dave thats great i wondered if the door switch on the top oven could be the culprit , are there any known issues that cause the grill to fail
thanks again John

[delta01]

Hi guys sorry to be so long responding after some thought i rewired the pump through the microswitch so it only operates when activated by the water level
i cant see why it needs to be more complicated its working fine now thanks John

[delta01]

Hi thanks Dave maybe it is but shurely it should not be running constantly

[delta01]

Thanks Dave i know where the front ntc is located where is the other , also it does have two metal strips for want of a better expression just down the inside of the front would that be the moisture sensor ?
John

[delta01]

Hi Dave yes i also cleaned the moisture sensor

[delta01]

Hi removing the sensor was difficult i got all four screws out but it resisted i could not get it fully off but some fluff came out and it seems to be ok thanks

[delta01]

Hi Dave its been suggested that it could be a build up of fluff behind the sensor i will try that thanks

[delta01]

Hi Dave it stays on on timed

[delta01]

Hi dave i will ask the customer to try it , what is the possibilty if it does, not thanks John

[delta01]

thanks Dave

[delta01]

Sorted it changed heater

[delta01]

Thanks Dave will do

[delta01]

Thanks again Dave

[delta01]

Thanks Dave

[Author]

Posts