[delta01]

hi yes it was the relay well burnt out we replaced it sorted thanks again John

[delta01]

Thanks guys will check it ouit

[delta01]

Hi iadom apparently they come out ok ie. cooled the machine is in a garage so unless she is interupting the cycle and feeling the clothes i cant understand what the problem is , i will speak to her again thanks for your input

[delta01]

just a further thought are there any other stats apart from the two above the heater

[delta01]

Hi sent you a pm

[delta01]

hi Sorry iadom how do i private message you thank Johm

[delta01]

HI Jim thanks its 916097378

[delta01]

Thanks Murv will get that John

[delta01]

Thanks Dave which is the one i need c00297210 ?

[delta01]

Hi dave i dont have any circuit diagrams for this machine however i checked the connections at the motor and pcb ends then tried it again and it works, i then tried moving the cable to the motor whilst running to detect any broken wires but it kept running so i am not sure what the problem was , i will test it a few more washes hopefully it will be ok thanks john

[delta01]

Hi i have used Qualtex for over thirty years but recently they have been disappointing and i am not happy that i can no longer talk to anyone i am seriously considering going to another supplier

[delta01]

Hi Thanks for the response However it turned out to be the pump was intermitently faulty thanks John

[delta01]

thanks iadom will do in future

[delta01]

Hi Dave thanks for your response i used a megga i checked all elements , even disconnected the main in and tested live and neutral to earth without any fault showing i thought i could be a low resistance fault on the hob , i noticed it seemed to feel like it was in that area when it tripped as i had my hand on the hob

[delta01]

hi it worked thats brilliant thanks again Dave

[Author]

Posts