Forum Replies Created
-
AuthorPosts
-
February 22, 2010 at 8:01 pm in reply to: Bosch WFF2000 – no draining or spinning at end of cycle #312782
don
ModeratorRe: Bosch WFF2000 – no draining or spinning at end of cycle
Try Bosch direct. Contact details here for spares and accessories. Instruction booklet should be part number 518090. Cost about a tenner posted.
HTH 🙂
Don
February 22, 2010 at 12:27 pm in reply to: Bosch WFF2000 – no draining or spinning at end of cycle #312777don
ModeratorRe: Bosch WFF2000 – no draining or spinning at end of cycle
Indeed, the full enr no. will be something like WFF2000GB/ ?? the last two digits are just as important as the rest of it when it comes to model identification.
DonFebruary 22, 2010 at 11:15 am in reply to: Bosch WFF2000 – no draining or spinning at end of cycle #312773don
ModeratorRe: Bosch WFF2000 – no draining or spinning at end of cycle
Hi
You can download instructions here by clicking on the download product manual link. You will need the full enr no. which can be found on the inside of the door.
HTH 🙂
Don
don
ModeratorRe: Recommendation required for built-in Dishwasher
Hi coolusee
The only area you didn`t cover on your list was semi integrated or fully integrated?
I can cover all your wishes either format for semi integrated the Neff S41M50 which comes in black, white or stainless steel fascia.
In fully integrated the Neff S52E50X1 covers all on your wish list as well.
Not only that but both will come in on budget as well.
HTH 🙂
Don
February 22, 2010 at 8:54 am in reply to: replacement for an old arrow/B&Q built in electric oven #312640don
ModeratorRe: replacement for an old arrow / B&Q built in electric
Hi Lucy
Hold on a minute 😆 I have just re read your original post. The recess dimensions you have quoted if correct is you have 560mm width available. Single ovens are just shy of 560mm wide which is pretty much standard nowadays. For instance Neff come in at 559mm and Hotpoint at 558cm. You have plenty of height as well as depth. So replacing the old Arrow should be no problem.
HTH 🙂
Don
don
ModeratorRe: Baumatic built in microwave
Hi
Air vents on the Baumatic micros appear to be on the top. Ventilation requirements and installation procedure here on the Baumatic website.
HTH 🙂
Don
don
ModeratorRe: Height reduction for SMEG WDF16BAX1 Washer Dryer
Hi
Lids are usually held by two screws at the rear or screws on either side, once removed lid usually slides towards towards the rear.
Be safe power off :zap: first.
Don
don
ModeratorRe: Delonghi ESS602 instruction manual
Hi Bishbash
No download available for ovens on the Delonghi website. A phone call to customer services on 023 9247 6000 might yield a manual.
Don
February 20, 2010 at 5:02 pm in reply to: replacement for an old arrow/B&Q built in electric oven #312638don
ModeratorRe: replacement for an old arrow / B&Q built in electric
Hi Lucy
I don`t know of any that springs to mind, but I`ll have a look on Monday when I`m back in the shop.
Don
don
ModeratorRe: Baumatic built in microwave
Hi
Any particular Baumatic model number ?
Don
don
ModeratorRe: Height reduction for SMEG WDF16BAX1 Washer Dryer
Hi sunny23
There is no mention of a height reduction kit for any of the Smeg machines in either the instruction manual or the sales blurb.
You could try ringing them on one of the contact numbers listed.
Failing that remove the lid and if it is okay to do so make up your own lid from perhaps an old lid from a scrap machine, local recycling centre may help you out if you ask nicely.
HTH 🙂
Don
don
ModeratorRe: Brand new Siemens SN26M890GB Error E:02
Don`t honestly know about the error code, but if you try another cycle and it works okay then you will have solved the problem. It`s rare for a Siemens product to fail on first use, but I guess there is a first time for everything.
Don
don
ModeratorRe: Brand new Siemens SN26M890GB Error E:02
Hi
How far down the standpipe have you pushed the waste hose? It should be no more than 12cm down otherwise it will cause an emptying and drying problem.
If the install is okay I would go back to the retailer.
HTH 🙂
Don
don
ModeratorRe: Miele K9412i larder fridge froze food
Hi
If the Miele is only 18 months old I would look out your reciept for the date of purchase. Miele built in appliances have a two year guarantee.
Miele service can be contacted on 01235 554455.
HTH 🙂Don
-
AuthorPosts
