Forum Replies Created
-
Posts
-
Re: Electrolux ESL6370RO
Hi
There are about thirty variants of that model so the PNC number 9114350???? would be good.
Don
Re: Need to replace my washing machine
Hi
With that weekly workload which is about twice normal use I would go with the Miele you refer to in your other thread which I believe is the WDD030 with the ten year warranty.
You will buy probably three budget end machines or one and a half Siemens in that 10 years which makes the Miele good value.
Just check out the warranty 😉
Don
Re: Miele Washing Machines
Hi
I always look upon it as anything cosmetic or a user part such as the filter and other things like the soap dispenser unless it develops a fault which is unlikely will probably not be covered.
Bearings I would say yes as long as the machine has not been abused, pumps as long as there is no evidence of misuse ie a hair grip or other foreign body stopping it from working.
I could be right with this or wrong by a mile.
If you want to find out it does say on the guarantee exclusions to contact them. Contact page here Let us know what reply you get as it may help others in the future.
DonRe: Bosch KGU30605 lights flashing
Lolofixes wrote:Sorry for the repeat post, I am finding it so difficult to use this forum!
Have found and deleted your original thread. It takes a while to find your way around sites these days as there are so many different designs.
Hope you get the problem sorted.
Don
Re: Samsung heat Pump dryer fan required
Hi Paul
You could use this man grabbed by the throat thread or start a new one if you wished.
Don
Re: Samsung heat Pump dryer fan required
garn wrote:Thanks for the reply.
?F PARTS? NOT SURE WHO THEY ARE.Here you go garn LF 🙂
Don
Re: Diplomat 600Ga Door seal advice please
Hi
The switch is probably the grill override switch. The door needs to be open for grilling if you close the door the switch will cut the grill out.
The hinges are probably worn due to the age and use of the oven which is why heat is escaping. An engineer would be required to confirm this is the case.
Don
Re: Diplomat 600Ga Door seal advice please
Hi
Yes you are correct 🙂
It’s a Stoves made oven an there is supposed to be that gap along the top.The new seal just tucks into the frame and you cut to size as it usually comes as a roll.
Don
Re: How to avoid plastic?
But that fix only lasts a few months as we have found. We have even advised the customers against using the hot wash option.
Best solution is don’t buy one in the first place, go with anything above series 2 and everything will be good.
Don
Re: zanuussi integrated washing machine drum
Hi Tom
Yes they do have sealed tub assemblies part no. 3484157304 about £150 trade plus the dreaded 😉
Don
Re: Diplomat 600Ga Door seal advice please
Hi
Can you post up the model number please as 600GA is a generic number for quite a few different ovens.
I believe from the 050 number you have posted you may have an ADP0150 oven. Label around the door area should reveal the all important detail.
We can then look at the drawing and advise further.
Don
Re: AEG DRYER E40 error
electrofix wrote:pnc and model number please
dave
And moved you to Trade tech enquiries 😀Don
Re: How to avoid plastic?
Yes your’s is a budget end model which is why it has the Polyinox plastic base. Bosch Neff produced these to keep to a price point below £400 originally in order to compete with other major players in the sector.
As I said previously the options with Bosch and Neff still stand.
The good news is that all other brands of dishwashers out there will have a full stainless steel tank.
Don
Re: How to avoid plastic?
Hi
Neff N50 series and up have full wrap stainless steel tanks. Bosch from the same stable as Neff. Their series 4 and up are full stainless steel.
Don
