dopper

Forum Replies Created

Viewing 15 posts - 481 through 495 (of 500 total)
1 2 3 … 32 33 34
  • Author
    Posts
  • April 7, 2006 at 6:31 pm in reply to: ind w113 #172113
    dopper
    Participant

    Re: ind w113

    went back to job checked carbons ,took all hoses from pump to see if blocked, cleared the side hose that goes to side of drum and its working ok now
    cheers

    March 29, 2006 at 2:16 pm in reply to: hotpoint test #171331
    dopper
    Participant

    Re: hotpoint test

    cheers the last one worked 3mins wait etc

    March 13, 2006 at 7:07 pm in reply to: w/pool awm049 #168941
    dopper
    Participant

    Re: w/pool awm049

    no start button ,just on off button
    slect any programe push the on off switch, the door locks, then this door open light comes on from this small pcb behind the panel
    the door lock is ok, i have looked at the plugs had to change one cheked wiring from door lock
    anyone know anything about this small board has a m/chip on it called a display module waterstop door open
    its about 2 inches sq

    March 13, 2006 at 8:33 am in reply to: w/pool awm049 #168939
    dopper
    Participant

    Re: w/pool awm049

    i got her the part number from connect and its got same numbers on the timer asthe old one

    March 1, 2006 at 4:22 pm in reply to: creda tcr2 #167180
    dopper
    Participant

    Re: creda tcr2

    cheers
    told by electure heater only

    March 1, 2006 at 4:19 pm in reply to: ind wax120 #167176
    dopper
    Participant

    Re: ind wax120

    cheers dave i thought it looked that way
    what a load of c**p these new machines are

    February 11, 2006 at 6:18 pm in reply to: hpt wd640 #164159
    dopper
    Participant

    Re: hpt wd640

    just had a look on codes page and will try the reset code
    cheers

    January 31, 2006 at 7:06 pm in reply to: hotpint dwt10 #162648
    dopper
    Participant

    Re: hotpint dwt10

    thanks to the customer has not got back so it must be working ok

    January 13, 2006 at 7:07 pm in reply to: hvr se160e #160756
    dopper
    Participant

    Re: hvr se160e

    customer had said it was draining ok but it was draining very slowly coin in hose
    cheers anyway

    November 27, 2005 at 9:07 pm in reply to: hpt wma63 #155737
    dopper
    Participant

    Re: hpt wma63

    cheers

    August 30, 2005 at 7:12 pm in reply to: W/POOL DRYER #146217
    dopper
    Participant

    Re: W/POOL DRYER

    SHOULD BE AWZ650

    August 30, 2005 at 6:17 pm in reply to: proline element #146123
    dopper
    Participant

    Re: proline element

    cheers lads ANY PART NUMBER?

    August 2, 2005 at 6:37 pm in reply to: condensor dryer #143825
    dopper
    Participant

    Re: condensor dryer

    it was an old person
    i have not seen the dryer he came in the shop .i said i have not heard of that b4.
    hopefully he’ll not come back
    ❓

    July 21, 2005 at 7:43 pm in reply to: naff screws #142804
    dopper
    Participant

    Re: naff screws

    cheers for help do u have hotpoint part number for bolts

    June 21, 2005 at 7:52 pm in reply to: extraction #139321
    dopper
    Participant

    Re: extraction

    electrue do a kit but when i spoke to the rep she says it only works on wmas if u have the old extractor kit which they do not sell. the kit they have was about £90 inc vat

  • Author
    Posts
Viewing 15 posts - 481 through 495 (of 500 total)
1 2 3 … 32 33 34