DPDOM

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 82 total)
  • Author
    Posts
  • in reply to: Kenwood KDW45x20 FF error #481053
    DPDOM
    Participant

    Thanks Murv
    dave@davidpeirce.com

    in reply to: Rangemaster 110 classic induction E4 #476705
    DPDOM
    Participant

    Hi Dave

    The original problem was E4 on both left rings. If I configure as per the Instructions then it doesn’t want to configure the first 2. I can configure in a different order fine but E4 still persists.
    Parts are expensive so want to try and get diagnosis right.

    I don’t normally do induction for this reason but long time customer talked me into it.
    Any help would be appreciated.

    Dave

    in reply to: Bosch WAT28370gb/13 Inverter pcb blown #470193
    DPDOM
    Participant

    Seems like the motor is the cause. Looks like another on the scrap heap.
    Thanks so much for your help Dave.


    Dave

    in reply to: Bosch WAT28370gb/13 Inverter pcb blown #470191
    DPDOM
    Participant

    It has popped a track under and to the side of a red/brown component next to the large capacitor.

    in reply to: Beko DIN28Q20 dishwasher not starting #469368
    DPDOM
    Participant

    It was the pcb.
    Cheers

    in reply to: Beko DIN28Q20 dishwasher not starting #469367
    DPDOM
    Participant

    Thanks guys. I’m going back at the end of the week.

    in reply to: Beko DIN28Q20 dishwasher not starting #469364
    DPDOM
    Participant
    in reply to: Beko DIN28Q20 dishwasher not starting #469362
    DPDOM
    Participant

    Door wires all ok.

    in reply to: Hotpoint TCUD97B f04 #462089
    DPDOM
    Participant

    Thanks Murv.
    I checked heater and stats and customer says it works sometimes. I’ll call back and check the Heater circuit.

    in reply to: Siemens HB75RB550B/05 oven trips RCD #435402
    DPDOM
    Participant

    Hi
    Did you ever get to the bottom of this one?
    I have the same issue and also tried a new power pcb and still have the same problem. The oven turns on and interior light comes on but as soon as the control pcb relay clicks it trips. I thought I would see what happens if I disconnected the earth wire to the power pcb but one of the relays on the control pcb went pop.

    Anyone have any ideas?

    Dave

    in reply to: Miele gG1182 SCVi dishwasher #457971
    DPDOM
    Participant

    Re: Miele gG1182 SCVi dishwasher

    I know what you mean as I’ve had plenty with blocked impellors but this was clear and I tried a new pressure switch.
    It was more like the module was loosing power as soon as the relay clicked in.
    Customer has already ordered a new dishwasher so one less stress this week.
    Thanks All
    David

    in reply to: aeg f34502v10 dw 91153911400 #454284
    DPDOM
    Participant

    Re: aeg f34502v10 dw 91153911400

    Bit late for you but I’ve had this when pressure switch was blocked and there was too much water inside.
    Dave

    in reply to: Miele gG1182 SCVi dishwasher #457969
    DPDOM
    Participant

    Re: Miele gG1182 SCVi dishwasher

    Yes I’ve tried the socket and checked the impeller. All seems fine.

    in reply to: Fridge Freezer hose. #455443
    DPDOM
    Participant

    Re: Fridge Freezer hose.

    5/16″ pipe and speedfit works perfectly

    Dave

    in reply to: Hotpoint os879d oven f03 and f53 #441882
    DPDOM
    Participant

    Re: Hotpoint os879d oven f03 and f53

    I can’t remember what I did yesterday let alone a year and a half ago. I’ll try and look back for details.
    David

Viewing 15 posts - 16 through 30 (of 82 total)