Forum Replies Created
-
Posts
-
Re: Diplomat ADP 8324
dipsenser is supposed to catch on top basket, it will still open enough to let soap out. If you get contuinual E2’s then changing the air break is usually the only solution. 766610112
Re: Hinges for Hygena APL3422
They are 14.25 each retail from MFI so maybe Dave here can do them for you. p/n:371837
Re: Zanussi FM56 Oven
I have some distant memory of many changed parts according to serial number on these…or was the the FM55?
great ovens, sold shed loads. Back in those days it was really dificult for diy’ers to buy built in appliances. We filled the shop and sold em easily, FM5 or 6 was the single oven version so many parts are the same for the main oven.Re: It has been suggested…
its the UKW st pats party then!
Can we have a late start on the Friday to negate the need for an overnight on Thursday?put me down for a room please Ken (4 poster, in room sauna, lake view 😆 )
mark.Re: Stoves 900EF main oven hinge probs.
The problem is the pins pulling out of one side of the housing in the door. The L shape bits will not cure the fault, you wont even need them. Lock the door open by placng 2 allen keys in the holes on the L shape backets and dismantle the door by removing the inner glass (slides out) and the screws for the handle. This will allow the outer glass and bracket to slide up and off the hinge brackets. You can now see the inside of the hinge brackets. The pins can be re fitted without too much problem and a thin metal shim each side can be added to keep them in place, at least until you get new parts or forever even!
Re: Smeg
O h yeah! the bad old days are back. They did get quite good about a year ago but now…… waited best part of 2 months for a door glass then it arrived smashed. Alt valve, waited about 3 weeks and these are fast moving parts that should be instock and those are for warranty jobs for which they usually make a bit of an effort.
If ordering fan elements for stock, order at least 5 and then they can come pretty quick, order just one and if not quoting a job number then you will wait for ever.Re: Whens a recall not a recall ??
Wouldnt mind if they were buying quality stuff. When its badged up Chinese junk they need to change the terms of any contract accordingly. Otherwise we are subsidising their buying policy.
Re: It has been suggested…
Funny enough was thinking about setting up a non official UKW meeting/evening there. As ever with things I think of I never actually get round to it and someone always jumps in first. yep, date depending I would be up for it.
I am away 9/10/11 March so cannot do around that weekend.Re: hotpoint dishwasher df61
suedehead1 wrote:the salt pot clamp ring is it easily accessable
Never had one leak, unless of course the stupid customer has loosend it. Cavity needs lifting to replace.
Re: hotpoint dishwasher df61
With both sides, door and panel under door removed you can see pretty much everywhere. With a dentist’s type mirror and torch you can check the circ pump seals run the machine till really hot as that is when the pump seals tend to leak.
Re: Whens a recall not a recall ??
Yes, going through the same with a WP. Dishwasher base flooded, 6 weeks later on/ off switch Breaks (ie come apart) labour rejected as re-call). Circ pump has since failed too and I have declined the job as I know we are not going to get paid.
Re: AEG S4085-7kg
In the fridge there are 2 sensors shown:
208 05 45-02/9
208 05 44-01/4and, in the freezer:
208 05 46-03/5all still readily available from electrolux and even electrue. who told you otherwise?
Re: Training Issues
wonder where the contact list has come from? From what I gather, Mr Scroggins may have shown interest.
Re: P&G training
OK just spoke to her, she says she does work for P&G. and they are offerring exactly the same as the UKW training + a dishwasher “module” (her words). She says that as it is P&G rather than UKW a lot more people are interested! she asked a few questions about haw many were at the UKW training I did etc.
I politly declined her offer for now. resisted the temptation to ask her how much per night for a twin axle winibago 😆
Mark
