Forum Replies Created
-
Posts
-
Re: Electrolux group automatic washer/washer dryer configura
We all seem to be assuming that this sort of problem is arising due to the “Work Providor” not supplying the info. The fact is for many of us here the “work Providor” is mrs Smith down the road. As the technology increases this sort of problem is going to arise more and more and if we dont share such information between us we will all be stuck and turning down good valuable chargeable work.
I too wouldnt divulge this information to Joe bloggs fixing his own machine, but if someone on this forum or DASA were to ask, and I could help, I would do so because in the future I may one day need assistance. We all have specialist knowledge in different areas and one day, even Alex, may need our help too.Re: Electrolux group automatic washer/washer dryer configura
Forgive me for interfeering, bit is this information not on the TDS offline disc?
Re: Fisher & Paykel
Alex wrote:Restaurant………… Doh!
What else could it be?
Holiday resort for a start!
Re: Fisher & Paykel
Daf wrote:The training given by F.P. has always been 1st class. right down to all expenses paid at an Italian
Just a matter of interest, an Italian what?
This dog thread (as it has become) reminds me of something that happened about 15 years ago while working in a customers house. The dog got hold of my tube of Debor from my toolbox (this was the days before silicon when we swore by the stuff-never seem to use it now) bit through it and ran up and down the garden, nose down to try and clean it off his/her mouth but only succeeded in picking up all the leaves, grass cuttings, insects, bushes, nettles, flowers, vegetables, rotten fruit anything from the garden in fact that stuck to the glue on his mouth. Dog returns inside house with half the garden on his mouth and nose and owner wonders in shock what the hell has happened to dog. Plans to rush him to vet etc. I just stayed very quiet.
Why in the deepest, winter days are we out repairing stuff in a filthy garage, with the door wide open cos there is just a measly, cobwebb covered 40 watt bulb up amongst the rafters, and the wind wistling through freezing your …off, and in summer we are sweating next to the burning hot Aga in some farmhouse kitchen?
And why do all possible overfill jobs occur in houses with the lowest pathetic water pressure which means everytime you need to check the level it takes like 20 mins to fill the damn thing.
and why do they start cleaning the worktop while you have your head in the back panel, covering you with dust?
and what about any job you can do from the front needs the damn machine pulling out just to access the plug?
and why do customers feed there damn pets right infront of the washing machine?
and why do they say “dont worry about the dog” when WE KNOW as soon as their back is turned they become ferocous, man eating wolves? And do they think we like having our faces licked while we are on the floor changing their pump?
and why do they start cooking in their oven when they know we are about to turn up and change the door hinges?
and why do they not even manage to get the make right when booking a call yet alone the model number?
and… is it so difficult to scoop the water out of a dead dishwasher rather than letting become a stinking solid mass of matter by the time we arrive?
must they always plunge their hands into the top of the machine to see if that really is concrete? Thus giving you a heart attack for fear of them touching something live, which no doubt they would sue us for.
I could go on….
Mark (had a bad day)Comet spares are now handled by CPC on 0870 6052020.
beware though, this part may not be as easy to change as it looks.
Check on the back, above the terminal block, some models have a toc which is a square block shape with four seperate connectors. I had half of one of these blow in tandem with the fan element and it casued all sorts of strange faults, (even the clock buzzer made a strangulated noise!) and no feed to the elements. Sorry not at home right now so cannot check the part number or model.
MarkEurorealm are at http://www.eurorealm.co.uk/Software.htm phone: 0118 9732977
and I to have used them for years as they look after and develope Stocklink for Wash Vac. I have asked time and again for a trial of their (rather dated now sounding) Service 2000 but all I ever get is a few a4 pages of screen shots. Despite being one of their customers they have never shown any interest in trying to sell me the product. Their Stock and Stock 2000 is good though and they always answer the phone straight away for tech support so it could be a good one.
Mark
