[electrofix]

have heard you talk about him but never met the weasel

they took over the Dasa too didn’t they in the hope of fooling people

Dave

[electrofix]

is the door locking ?

dave

[electrofix]

well nac should take responsibility if they pass on the work but no doubt there will be some sort of get out clause

are they not vetting their engineers hmm

Dave

[electrofix]

both Qualtex and connect at about £67 per hinge for the main oven plus vat and carriage. grill hinge is dearer

both no stock

Dave

[electrofix]

sounds like a drum failure if its not bouncing round hitting the case

not worth repairing but if its covered by an extended parts warranty then Indesit will fix it for just their labour charge

Dave

[electrofix]

not got this code for the washer but on a dryer F9 E2 is pressure sensor so Kai could well be on right track

Dave

[electrofix]

ok search for MTR121

i clicked the link and it came up the same as yours . then went to search bar and it came up weird

Dave

[electrofix]

email deleted

Dave

[electrofix]

when does it knock ?

has it done it on more than one wash load ?

is it bouncing around ?

dave

[electrofix]

try this

https://store.ukwhitegoods.co.uk/catalogsearch/result/?q=mtr121

Dave

[electrofix]

check your email

Dave

[electrofix]

where did you work in the industry and what did you work on ?

Dave

[electrofix]

did the motor or board get wet ?

Dave

[electrofix]

have emailed you some tech info

Dave

[electrofix]

assume you have checked the condenser is clear both ways

also which 2 lights are lit .
machine does not seem to have error codes as such so not sure what it will mean

could be a blocked pump chamber as the fluff up. if its getting full will give water full light even if draw is empty

Dave

[Author]

Posts