Forum Replies Created
-
Posts
-
Re: Indesit new WIL143SUK door leaks
bet if you rang Qualtex with the cabinet code it will use a different door
you cant trust the database these days to come up with the correct part based on the model alone
Dave
Re: Bosch Dishwasher dead!
Martin is right
on later dishwashers the mains lead is separate and plugs into the back of the machine
check this plug is all the way in also check the mains plug
if you just leave it and it starts to arc it may blow the main board
Dave
Re: WHIRLPOOL APPARENT FILTER BLOCKAGE
with all whirlpool dishwasher faults first think to check is broken wires at the bottom of the door
remove door outer and checkDave
Re: Whirlpool Top loader 3RLSQ8033RWO Washing mc-not drainin
i know you can will go digging
Dave
took a bit
try 481253268088 maytag 3354569
Dave
Re: Creda C366e Timer Fault
to bridge timer join the wires on the left ( the white and the red underneath)
if you use a piggy back connector it can be restored easily at some stage
Dave
Re: Whirlpool Top loader 3RLSQ8033RWO Washing mc-not drainin
some machines are fitted with a smaller pump output shaft that means you have to fit an adaptor to enlarge it for the pump to work and these can wear causing drive issues
if that is not the case then there is not much left. I assume motor is turning in the right direction and the sump filter is clear at the bottom of the tub
Dave
Re: Miele premier 520 stuck on main wash
is it getting hot ie is the heater operating. don’t know about Miele but a lot of machine don’t fault code heater failure and it makes the programmes stick or last a lot longer
Dave
Re: Bosch Dishwasher Problems
a lot of Bosch dishwashers have a clear label on the top of the door, by the door catch. on the stainless part
to see it you have to view it slightly to the side as it looks invisibleDave
Re: Siemens Dishwasher – 2nd Opinion
if you go on ebay and look for the motor things get cheaper from £55
part number 651956
Dave
Re: Hoover DYC7813NB tumble dryer
all it takes is a google search to get this
from this site
E15Heater relay faulty (ccondenser dryer models) or Open front TOC (vented dryer models)
Condenser tumble dryer models:
•Check heater relay
•Check wiring
•Check heaterVented tumble dryer models:
•Check front thermal overload cutout (TOC)
•Check wiring to TOC
•Check connectors to TOCDave
Re: Miele Dishwasher G1180VI
am only guessing here but there is sometimes a pressure switch that senses water pressure when the wash pump starts. if this has failed it may cause this
Dave
