[electrofix]

Re: Hpt WM 72

some of these programmers had a 6.3 amp fuse on the board

Dave

[electrofix]

Re: LG F1403RD – bearing replacement

dont tell them a thing take great care to make it look although no one has been in
when they come just act dumb and say its noisy

Dave

[electrofix]

Re: LG F1403RD – bearing replacement

check your guarentee

pretty sure it will be 2 years

Dave

[electrofix]

Re: Bosch washer not heating- PCB?

had a bosch dishwasher before christmas where the heater relay had failed to check you have to run the machine with the pcb exposed and check for dc voltage on the relay coil

dave

[electrofix]

Re: Diplomat HJA 8703 washer dryer fault

if you cant see a filter it will be in the hose betweem the drum and the pump

Dave

[electrofix]

Re: Diplomat HJA 8703 washer dryer fault

have you checked the filter recently ?

and when you have filter out look inside to see if there is a hairclip or anything stoping the pump

Dave

[electrofix]

Re: Beko DRCS68

let me have you email will send you what i have

dave

[electrofix]

Re: Bosch wvd2452sgb/03 pcb Fault?

it is very difficult to diagnose a fault like this without inspecting the machine

i would suspect the door lock has blown the board and this can only be confirmed by looking at the triac that controls this and doing electrical tests on it

Dave

[electrofix]

Re: Hoover Soft Wave Timer Knob

bet they were glad to get rid of it

lol

Dave

[electrofix]

Re: Howden washing machine HJA8703

this machine should be a hoover/candy in disguise should not be a problem
check pump first for blockages elastic bands etc

Dave

[electrofix]

Re: A Bit James Bond..

from the website

http://martinjetpack.com/faqs.aspx

does not give you a lot of flying time

“Flies for a reasonable amount of time (30 minutes) at a reasonable speed (up to 100 kph) “

for those emergency repairs when the machine floods the kitchen
call out charge £2000 might be a bit steep so will give it a miss

lol

Dave

p.s. are you allowed to land it in a petrol station for refueling ?

p.p.s

its not a jet engine its a 2 stoke engine

“Martin Aircraft 2.0 L V4 2 stroke, rated at 200 hp (150 kw). Max 6000 rpm”

[electrofix]

Re: Asko W90 (aka 10504) only spins

dont know this machine but
from what you describe it sounds like the motor is going into spin speed and the machine detects the fault and shuts down

could be

1 motor short to earth
2 motor tacho magnet loose or broken also poss tacho coils open circuit
3 main printed circuit board triac short circuit

you may need the help of a professional

Dave

[electrofix]

Re: zanussi ZJ1217 bearing prob

when you say lateral i assume you mean up vand down not forwards and back

if you have that kind of movement something has worn
its either the bearing housing or the drum shaft not much else it can be
dont forget 2mm movement at the bearings will give you 10mm at the front

Dave

[electrofix]

Re: outer oven door

are you sure about the model cant trace it ?

get most of my diplomat spares from Europart

Dave

[electrofix]

Re: Heater PCB relays: which ones do you use?

as with most components it depends on what is fitted to the board
get some relays from RS but have to get others from Farnell

Dave

[Author]

Posts