Forum Replies Created
-
Posts
-
had that a few times
you get round to dumping it and 6 months later you want it
you have to draw the line somewhere. found a recon kit for a hard box hoover turbo 1 the other day. gen hoover part never been used. kept the wheels dumped the rest
Dave
Dave
they are a bit highly priced
Aswo is cheapest £55 pls vat
the only othe possibilty i can find is this
Zanussi Tumble Dryer ZDC37200W Heater Assembly – Includes Thermostat | eBay
looks like same element with different plug
Dave
https://ifixappliances.ca/samsung-oven-error-codes/
not a rock solid source but this sort of points to sensor problems
assume temps you have are sort of correct
worth checking other elements as you point out its a bit slow in getting to temp. some ovens preheat using more than one element
Dave
well first i need the full pnc number
looked up the model and got 33 machines with same model
also the board may be faulty but can sometimes be repaired
Dave
that does not sound good at all and its not dampers the drum is not moving enough
I think it may be the tube the bearings are housed in, in the tub rear..
have had a few of them come loose over the years and if it is that its terminal without a new drumis there any play in the spider / drum within the bearings ?
Dave
did you grease the rods?
put your hand on th top concrete weight and push down. the drum should go straight down. if it tries to go to one side then one shock is too loose or tight
Dave
have emailed you the tech
includes service bullitin of spin problems on certain boards but needs software if thats the problem
you can look for fault codes
Dave
As far as i know the Miele standard warranty has always been 2 year but the do promotions every now and then for 5 or 10 years
Don should be able to confirm this
Dave
its all down to design and not really where its made
have had miele part labelled made in china so really the factory is an assembly plant for parts made elsewhere. cars are no different these days
Dave
