Forum Replies Created
-
AuthorPosts
-
funkyboogy
ParticipantRe: beko wm wma765s
havent checked brushs , but will do..
cheers allyfunkyboogy
ParticipantRe: beko wm wma765s
cheers, i had looked through fault codes but didnt hink to search
dohhhhhhhhhhh
ally
funkyboogy
ParticipantRe: servis m6725w
try a wash timer, had a few strange faults on these adn fitted quite a lot of wash timers,
also check heater
allyfunkyboogy
ParticipantRe: Just noticed this pop up…
think this was initialy set up to cater for customer who bought app from currys , who then called currys for an out of warranty repair,
currys would pass cust to rep-care , r/c would then pass on to agent , and agent would then get all the chargeable work, r/c would receive nothing..someone oviously has noticed this and set up the scheme to make something out this chargeable work..
looks like its took legs and their marketing their sevices to a wider audience..ally
funkyboogy
ParticipantRe: best toolboxes?
a tad eighties the breifcase thing ?. only looks the part if you actually fix the appliance.. can make you look like a right plonker if you dont.
ps i did have one back in the day , thought i was james bond of the appliance world..seriously thought about getting some dry ice hooked up to appear when i opened case.
funkyboogy
ParticipantRe: beko wm wma765s
found this googling… dont know if it will help with the fault i have,
but may be of useBeko wma reset procedure
Turn power button off (not at wall)
Select 90 degree wash
Press Start and Cancel button down at same time for 3 seconds and turn power button on whilst still holding buttons down – Start light will flash.
Leave power on.
Select any Spin position.
Press Start and Cancel button at same time again for 3 seconds – other buttons may start to flash – if they do, press Start and Cancel button together again for 3 seconds.
Machine should be re-set ready for use.ally
funkyboogy
ParticipantRe: zanussi IZ161W
have done , doesnt show any faults..
its a bit of a strange one..
weve put a new pcb and pressure switch in , still same fault..
allyfunkyboogy
ParticipantRe: caple DI454
havent came across this fault , but have seen then leaking from collar under under spray arm..
ally
funkyboogy
ParticipantRe: fisher-paykel dishwasher
must be some one
?funkyboogy
ParticipantRe: Empire Direct Bust!
just received email, advising to put empire work on hold,
thankfully we havent done much work for recently,
allyfunkyboogy
ParticipantRe: fisher-paykel dishwasher
any help apprietiated
funkyboogy
ParticipantRe: Zanussi WJS166SW
prob need new pcb , its one of those jobs that you need to fit part and see..
allyfunkyboogy
ParticipantRe: samsung srs 2028cvw
possible fan failure in frz, you would need to strip frzr evap cover off to check, defo sensor can cause fan failure..
allyfunkyboogy
ParticipantRe: Servis M9503W-1 Dryer fault
dryer timer/selector ?
had one beforefunkyboogy
ParticipantRe: Servis UK (Antonio Merloni) Bust!?
OUR OF THE FRYING PAN……
-
AuthorPosts
