Galway

Forum Replies Created

Viewing 15 posts - 166 through 180 (of 245 total)
1 2 3 … 11 12 13 … 15 16 17
  • Author
    Posts
  • April 22, 2009 at 8:29 pm in reply to: Tricity bendix BS60B (944170026 or maybe 5 on end ) #283888
    Galway
    Participant

    Re: Tricity bendix BS60B (944170026 or maybe 5 on end )

    sorry it is a single oven.

    April 9, 2009 at 5:44 pm in reply to: electrolux automatic defrost F/F Er8034I #282717
    Galway
    Participant

    Re: electrolux automatic defrost F/F Er8034I

    thanks you were right i dont like it. 🙁

    March 30, 2009 at 8:22 pm in reply to: adp5540 whirlpool d/w #281528
    Galway
    Participant

    Re: adp5540 whirlpool d/w

    do you know which reed switch it is as this job is not near me
    thanks

    March 30, 2009 at 7:59 pm in reply to: adp5540 whirlpool d/w #281526
    Galway
    Participant

    Re: adp5540 whirlpool d/w

    thanks but can the flow meter be ordered on its own?

    March 30, 2009 at 4:11 pm in reply to: adp5540 whirlpool d/w #281524
    Galway
    Participant

    Re: adp5540 whirlpool d/w

    does anyone have the part no.for this flow meter
    service no is 854254015750
    thanks

    March 28, 2009 at 5:44 pm in reply to: Door boot springs #281348
    Galway
    Participant

    Re: Door boot springs

    similar to a stanley clamp model 0-83-086 but the bag i got had alot of different sizes.if you google this you will see what they look like.hope it makes life easier.

    March 28, 2009 at 5:12 pm in reply to: Door boot springs #281346
    Galway
    Participant

    Re: Door boot springs

    plastic spring clamp from aldi to hold spring on top then feed spring around easy .in and out in 15 min

    March 21, 2009 at 2:36 pm in reply to: BEKO DRYER #280899
    Galway
    Participant

    Re: BEKO DRYER

    is it heating fully on other programmes .these heaters always giving problems.

    December 15, 2008 at 9:29 pm in reply to: Beko DRCS68W #271335
    Galway
    Participant

    Re: Beko DRCS68W

    usually a heater problem with these machines

    December 2, 2008 at 10:05 pm in reply to: hoover nextra hnd 325 D/W #270348
    Galway
    Participant

    Re: hoover nextra hnd 325 D/W

    thanks for that .it should do the job

    December 2, 2008 at 9:40 pm in reply to: hoover nextra hnd 325 D/W #270346
    Galway
    Participant

    Re: hoover nextra hnd 325 D/W

    looked at this today could not find anything out of the ordinary.but it stoped in mid cycle with programme button flashing and beeping.the water in the base was hot ?any ideas

    December 2, 2008 at 7:35 pm in reply to: Candy cic60 motor replacement (is it worth it) #270476
    Galway
    Participant

    Re: Candy cic60 motor replacement (is it worth it)

    usually the clean filter light is a replacement Heater which may have been caused if the motor did not run but i would try a new motor capacitor on this before going down the new motor road.

    November 27, 2008 at 8:07 pm in reply to: hotpoint ctdoop #270006
    Galway
    Participant

    Re: hotpoint ctdoop

    maybe i did replace the capacitor on this about a year ago but i will check
    thanks..

    November 27, 2008 at 7:44 pm in reply to: Beko Condensor Dryer #269853
    Galway
    Participant

    Re: Beko Condensor Dryer

    Element? maybe

    September 23, 2008 at 5:34 pm in reply to: Zanussi tcs683 #263284
    Galway
    Participant

    Re: Zanussi tcs683

    maybe a TOC on element?

  • Author
    Posts
Viewing 15 posts - 166 through 180 (of 245 total)
1 2 3 … 11 12 13 … 15 16 17