Forum Replies Created
-
Posts
-
Re: Neff S4453N0GB/13 no water going in
how did he determine it was the programmer.did he check hoses and pressure chambers etc?
Re: Miele G638I plus dishwasher
I ordered a new pressure switch (which you could hear click when you blow in it ) and the problem is solved !
Thanks for your help 😀Re: Miele HG01 Premier Dishwasher
not sure if this machine is similar the my post for the Miele G638I plus. similar problem.
Re: Miele G638I plus dishwasher
ok will do.do you have to put d/w on its back to take bottom tray off to split motor to check propellors?
Re: Miele G638I plus dishwasher
thanks for replies checked filters ok.checked the pressure switch and it does not click when you blow into it .should it click or is it caput?thanks
Re: Diplomat (Haier) dishwasher ADP8352 no heat
usually its the ntc in the haier machines they can be reset but you should replace!
Re: Miele G638I plus dishwasher
checked the drain pump and cleared it or is it the circulation pump? or could a slow inlet valve cause this . water coming in but does not sound as loud as other d/w.
Re: Whirlpool D/W ADP4403 F07
had this problem yesterday after being there last week and tightening connection on flow meter i left snd it worked for 4 days no problem then had to go again the same problem.i even changed the reed switch on flow meter but no good.it turns out it was the connection on the pcb.
Re: BEKO WM5120W PCB faulty ??
.i am sure you did this but just in case.did you try to cancel by keeping start button pressed as i have had customers telling me its not working only to find she had started another cycle and not cancelled it.other than that its the pcb.
