Forum Replies Created
-
Posts
-
Re: currys fridge part no REQ
garn wrote:hi chaps
1 of the schools has phoned they need a new door seal for a currys fridge.the only model no they can see is [b]355TW12
CANT SEE TO FIND THE MODEL IN THE DISTRIBUTORS WHEN I GOGGLE THE INFO IT DOES COME UP WITH A DIFFERENT MODEL.
?ANY 1 GOT A MODEL OR PART NUMBER FOR THIS PLEASE.
Thanks Garn…
Soz now finally got the model Currys Essentials model C55TW12 SN 1324003598 cant find a part in stock im also under the impression that baumatic may fit it does anyone know where i can get 1 or an alternative part that will fit
thanks paul…Re: Hotpoint WMT03p
Yep martin. she cant see very well its so bad even oferd her a brail.dash
Thanks PaulRe: Scrap machines, worth anything
Yep Martin bought on the way back from the scrapyard and because im over 50 it costs £160 a year to insure.
Garn
Sent from my GT-I9505 using TapatalkRe: Scrap machines, worth anything
Minimum average hpt wm motor weighs 3.8kg thats one of lightest. Its about 220motors to the ton. I took 230 motors and three tesco baskets of pumps in without the plastic on. Bought a Mercedes c200 2ltr petrol with an lpg gas fitted . £30 worh 340.370 miles.
Sent from my GT-I9505 using Tapatalk
Re: wae2416sgb04
Try the door lock there’s a batch of them been going lately less than 2 years.old.
Bosch engineers have been sending them back for investigation.
Also there’s a sign that full function of digital display never works from new new lock and all fixed Inc the display.Garn
Re: The 0800 Thread
andy_art_trigg wrote:I think the objection is to web sites pretending to be local when they aren’t 🙂 especially when they usurp all the genuine local engineers because they have more money. That stinks.
People come to my site from all over the UK, if they read advice or articles and then decide they want to book an engineer they can go to my repairs page and ideally find a genuine local engineer who’s advertising there. That should work ok 🙂
If someone comes onto the web to find a local engineer from the off they wont come to me but if they are looking for diy help or error code explanations etc they may well come to me first. If I can pass them onto proper local engineers that’s good for everyone but all I really have at the moment is UK wide service “providers”. The local guys with small web sites don’t get a look in.How about getting my self registerd on your site. down my neck of the woods D&G only come up in the carmarthenshire 🙂 area im a sole trader SA18 and as far as SA20 and around the woods. the area is Very rural 😉
Garn…Re: whitegoods fault code guide app
Hi Chaps.
Just About To Purchace 1 of these new type phones Q which is the best model that i can use for the new fault code app.
and has LARGE PRINT over the past couple of years iv been using a doro 615 which is brill for us older chaps.As for paying i dont mind. every time that iv had to dig the old fault book out for a referene guide to a fault iv always made a profit from it rather than walk away .
And The Same Stands for the FREE INFO on the forum.
EXAMPLE I Was Out on a indesit a couple of months ago just a blocked pump thought a easy job.
Cleard the chamber turned it on and the blinking thing had a mind of its own flashing constant pumping could not clear the fault i was blowing and sucking on this new type presure switch (THE BLUE 1).
Then i rememberd a thread that JIM Wrote about this Problem u had to Prime the appliance with 2pints of water first.Thanks to Jims Free Info I Made £50.00.
so 1 to 2 Fixes of the new Fault App and your £££ in so i dont mind paying.
Q Which Phone Whould be the bestPaul…
Re: belling farmhouse 911 timer fault
Just Been Searching for A Timer For A bekking Farmhouse 930.
The Thing is Ringing constantly.
is It The same Procedure As 911 model above Relay Bypass.
Thanks UKWG & Gogle Search.
Garn.
