Forum Replies Created
-
Posts
-
Re: Whirlpool fridge ARG 992 at room temp
Hi
It sounds to me like the refrigerant has become low, possibly down to a poor joint. Failing that you may be unlucky and either have a blockage in the system or a weak compressor.
You are going to need pro help to identify which you have.Greg
Re: whirlpool fridge freezers(frost free?)
Hi
Possibilties –
1/ Door not sealing
2/ Next to a heat source ie cooker
3/ Fitted in a cabinet (It is a freestanding appliance)
4/ Poor insulation of door and/or cabinet in manufacture.Greg
Re: Bosch Dishwasher – SGS4332GB/17 – control went bang
Hi
Module is p/no 269965 @ £68.10+VAT etc. It is available from spares@ukwhitegoods.co.uk.
There is a good chance like you mentioned that something else may have gone causing the module to blow.
If you need an engineer in your area then please feel free to use the link below. 🙂Greg
Re: Bosch SGS 5302 Problem
Hi
Module is p/no 264877 @ £90.20 +VAT etc. This is available from spares@ukwhitegoods.co.uk, if required.Greg
Re: siemens dishwasher top spray arm not turning
Hi
This model doesn’t have the diverter unit, so I can only guess that there maybe a restriction from the heater to the top basket,recirculation pump is weak or has restriction or low water level.Greg
Re: Whirlpool AWZ 8812 Condensor Dryer steam from door/overh
Hi
Correct identification.
Part change to 481246688863. Available from spares@ukwhitegoods.co.ukGreg
Re: Bosch SGS 5302 Problem
Hi
If you mean it has a red dot in the corner of the display then it means the electronic module has failed and will need replacing.
Please post full model number eteched on top of stainless steel door inner.Greg
Re: BOSCH WFF 2001 HELP PLEASE!
Hi
Thats sounds a right mess.
Have a look here it may help 😕
http://www.ukwhitegoods.co.uk/modules.p … age&pid=43Greg
Re: water dispenser freezing
IIRC that is to stop condensation on the freezer door 😕 don’t quote me on that.
Greg
Re: bosch wff 2000 dial problem
Hi
Panel will come off relatively easily. Nibs left and right of fascia side and screws in dispenser IIRC.Greg
Re: siemens dishwasher top spray arm not turning
Hi
No it comes as part of the instantaneous water heater unit, if fitted.
Model number will give us more info 😉Greg
Re: siemens dishwasher top spray arm not turning
Probably the diverter on the heater unit has failed.
As turbo said model number 😀Greg
Re: 2 and a half year Bosch dishwasher needs replacing
Hi
It should attempt to drain, that is the first thing it should do, then fill with water.Then it should recirculate the water and stop filling.
If you are happy that the tap under the sink is in the on position and the hose isn’t kinked then it could be a number of things why it doesn’t fill from faulty fill valve to PCB to problem with the pressure system.
IMHO now would be a good time to call an engineer as its gone from a not heating fault to another fault.Greg
