geoff1

Forum Replies Created

Viewing 15 posts - 286 through 300 (of 409 total)
1 2 3 … 19 20 21 … 26 27 28
  • Author
    Posts
  • October 13, 2009 at 8:04 pm in reply to: Tecnogas Cuisine 2600 Cooker #299459
    geoff1
    Participant

    Re: Tecnogas Cuisine 2600 Cooker

    Retailed by Comet back in the eighties and nineties. Well old.

    Geoff

    October 12, 2009 at 6:36 pm in reply to: Zanussi TC7102W 91672060100 #299358
    geoff1
    Participant

    Re: Zanussi TC7102W 91672060100

    Hi Alan

    Check you email

    Geoff

    October 11, 2009 at 7:55 am in reply to: RC21DCNS Samsung Fridge Freezer Trips FUSE BOX #298943
    geoff1
    Participant

    Re: RC21DCNS Samsung Fridge Freezer Trips FUSE BOX

    Hi

    Sounds like element in fridge down to earth as I changed one for this yesterday. It looked to me as if moisture had entered into ends of element causing earthing fault. Thats my own option. Were you given any warranty on the repair when it was last changed?

    Geoff

    October 10, 2009 at 10:09 pm in reply to: General Electric #298320
    geoff1
    Participant

    Re: General Electric

    Hi Dave

    This link may help with part numbers

    http://www.appliancepartsnationwide.com/DDE5211BBL.htm

    From here I think heater is WE11X60 and Bearing a possible WE3X37 but would ask you check on parts list.

    I cannot find a supplier in uk but on EBAY there are some sites selling these parts which will come from USA.

    HTH

    Geoff

    October 7, 2009 at 5:43 pm in reply to: tricity/ thorn oven motor #298931
    geoff1
    Participant

    Re: tricity/ thorn oven motor

    looking for

    3112229004

    Geoff

    October 7, 2009 at 5:35 pm in reply to: Samsung RS21NCSV #298928
    geoff1
    Participant

    Re: Samsung RS21NCSV

    Hi

    Thank for your reply and the information about the defrost with heater being disconnected. learn something new everday

    The segment lit – is that because there is no heater or is there another fault?

    I have had a look for fault codes through the masses of posts on this appliance but can not see anything that relates to that segement.

    Geoff

    September 18, 2009 at 9:30 pm in reply to: Miele K8452s #294186
    geoff1
    Participant

    Re: Miele K8452s

    and the answer is the sensor – thank you clayside.

    They suffer with mositure getting into them according to the information that comes with the replacement.

    No a bad job to do

    Geoff

    September 15, 2009 at 6:50 am in reply to: Hpt TDC32P #295869
    geoff1
    Participant

    Re: Hpt TDC32P

    Good one

    I like those easy Jobs

    Geoff

    September 14, 2009 at 4:17 pm in reply to: Hpt TDC32P #295867
    geoff1
    Participant

    Re: Hpt TDC32P

    Hi chris

    Did yours come with felt and pads??

    Geoff

    September 9, 2009 at 9:20 am in reply to: Bendix DH086 D/W #296627
    geoff1
    Participant

    Re: Bendix DH086 D/W

    Hi Jim

    Try these numbers

    1520646017 1 button unit now 50287473008 in stock with connect. It is a 6 tag switch.
    Hope this helps

    Geoff

    September 8, 2009 at 8:25 pm in reply to: Hotpoint WF860 Mains Filter. #296602
    geoff1
    Participant

    Re: Hotpoint WF860 Mains Filter.

    Hi

    The filter only comes complete with mains lead which is part number C00119257. From my memory the earth wires on these machines are black.

    HTH

    Geoff

    September 8, 2009 at 5:00 pm in reply to: hotpoint BD42ss #296587
    geoff1
    Participant

    Re: hotpoint BD42ss

    Hi

    Cannot see part number for complete oven door but main parts are as listed

    Main outer oven glass c00199532
    Main oven handle c00199534
    Main oven metal inner panel c00199527
    main oven inner glass c00199684
    main oven hinge c00199565

    HTH

    Geoff

    September 8, 2009 at 4:53 pm in reply to: Hotpoint WF540PB #296589
    geoff1
    Participant

    Re: Hotpoint WF540PB

    Hi

    Part number is C00143610 (1605481)

    Checked on qualtex and description adds “belt 1205 j5”

    Geoff

    September 3, 2009 at 12:26 pm in reply to: zanussi zwd1227ow #296195
    geoff1
    Participant

    Re: zanussi zwd1227ow

    Hi

    Have you checked the cut out fitted to side of heater tunnel? It is a manual reset version with a red push pin in the middle. Check for continuity through this cut out and if not push pin in to reset. ( cuts power to elements). If this has cut out check for blockages in the condensor etc as air flow has been restricted

    Geoff

    September 2, 2009 at 8:26 pm in reply to: indesits #296072
    geoff1
    Participant

    Re: indesits

    Hi

    I Have 2 customers whose hotpoints freeze during the cycle and need to be reset by unpluging the appliance. From hotpoint they believe that the toc in the motor is tripping causing the module to stop the appliance. You can only get it going again by unplugging at mains to clear the module of its fault information.

    I have replaced motors in both and awaiting to see if I get a call back.

    units are WMF740p.

    Geoff

  • Author
    Posts
Viewing 15 posts - 286 through 300 (of 409 total)
1 2 3 … 19 20 21 … 26 27 28