[Grendal]

If the pump was burnt out it could have taken out the module, I have had it a few times. Otherwise it is a re programme of the module

[Grendal]

How did you re set it ?

[Grendal]

Check the wiring loom at the motor plug , the wires break, you can refit the wires without a new loom.

[Grendal]

Have you checked for low insulation on the appliance,this can cause this fault

[Grendal]

Is there a breather hose at the top ? Think you do it through there

[Grendal]

Just had a look on wedoc and it is showing that they are push in seals nice and easy

[Grendal]

the one fatal code that if it detects it is the thermister, it will not let it finish the test programme if this is faulty. Failing that you will have a problem with the board.

[Grendal]

Hi the code is 07

[Grendal]

Re: Indesit Dishwasher DI450 Wash Pump?

Blocked sump

[Grendal]

Re: Whirlpool AWO/C 0714

If the heater measures ok it will be the board (check continuity and ir)

[Grendal]

Re: w/pool washer

It will be the control board part no is 481010460544

[Grendal]

Re: whirlpool AZB8680 dryer

thats the reed switch it clips to the top of the condenser housing

[Grendal]

Re: whirlpool AZB8680 dryer

It is on the plug that goes to the pump. It will be the first one I have ever seen that hasnt got one if not

[Grendal]

Re: whirlpool AZB8680 dryer

Item 6160 pt no 480112101476 is the reed switch it fits on top of the condenser housing

[Grendal]

Re: whirlpool AZB8680 dryer

Did you put the reed switch back on top of the condenser ?

[Author]

Posts