hilly

Forum Replies Created

Viewing 15 posts - 226 through 240 (of 287 total)
1 2 3 … 15 16 17 18 19 20
  • Author
    Posts
  • March 29, 2007 at 10:01 pm in reply to: hyundai dw13? #208967
    hilly
    Participant

    Re: hyundai dw13?

    has anyone else come across one of these or am i the unlucky one?
    seems ashame to pass up on this job when all it needs is a stat (it fixed into a brass housing under base of d/w) no markings on stat so dont just want to guess & end up with a recall.

    ta paul

    March 19, 2007 at 4:39 pm in reply to: another indesit pls help #207729
    hilly
    Participant

    Re: another indesit pls help

    cured problem! replaced pcb with one from emw. all working fine now
    cheers for replies and cheers tony @ emw


    thanks again paul 😀

    March 14, 2007 at 7:44 am in reply to: another indesit pls help #207728
    hilly
    Participant

    Re: another indesit pls help

    yes it spins ok . i will try cleaning the pcb

    cheers for replies
    paul

    March 13, 2007 at 9:52 pm in reply to: another indesit pls help #207725
    hilly
    Participant

    Re: another indesit pls help

    solonoid tested all ok 😕

    March 13, 2007 at 8:34 pm in reply to: indesit wd12uk #207412
    hilly
    Participant

    Re: indesit wd12uk

    cheers gegsy . learning everyday :rolls:

    March 13, 2007 at 8:14 pm in reply to: indesit wd12uk #207410
    hilly
    Participant

    Re: indesitwd12uk

    yes you was right 13 flashes thanks for info i didnt know the flashes were an error code. 😳 that will help me in the future 😀


    muchly appreciated paul

    March 11, 2007 at 7:52 pm in reply to: indesit wd12uk #207408
    hilly
    Participant

    Re: indesitwd12uk

    sorry chris forgot to mention it does detect a fault and the timer does start clicking around


    paul

    January 27, 2007 at 6:56 pm in reply to: whirlpool & neb oven parts help!! #202417
    hilly
    Participant

    Re: whirlpool & neb oven parts help!!

    cheers chris

    January 26, 2007 at 6:45 pm in reply to: large syringe #153469
    hilly
    Participant

    Re: large syringe

    i recently got a syringe from machine mart its classed as a oil suction gun but its just a large stainless steel syringe with flexible hose attatched which is maybe a bit large for the tool box seems like its indestructable take a look at it http://www.machinemart.co.uk part no 040215070 and its only £5.99 pls vat ! bargain !
    its been very useful for me so far.


    paul

    January 23, 2007 at 7:38 pm in reply to: hotpoint wd64 #201865
    hilly
    Participant

    Re: hotpoint wd64

    thanks for replies it was a chaffed wire on motor harness. tyipical i overlooked the simple thing 😳 😳


    cheers again, paul

    January 18, 2007 at 8:44 am in reply to: bosch condenser dryer #201263
    hilly
    Participant

    Re: bosch condenser dryer

    cheers clive matrix is clear when u say the normal stat is it the one located at the back next to the reset or is there one lurking elsewhere? ive never had anything to do with this model b4 so forgive my ignorance.

    thanks paul

    January 11, 2007 at 10:05 pm in reply to: servis d/w error code #199454
    hilly
    Participant

    Re: servis d/w error code

    cheers steve will check it out! why cant they keep it simple? 😕

    paul

    January 4, 2007 at 8:58 am in reply to: bosch d/w showing F on display? #199452
    hilly
    Participant

    Re: bosch d/w showing F on display?

    thanks will check it out

    paul

    January 1, 2007 at 8:21 pm in reply to: creda crusader condenser dryer #199056
    hilly
    Participant

    Re: creda crusader condenser dryer

    cheers chris

    November 14, 2006 at 9:16 pm in reply to: hotpoint FDW60 #194997
    hilly
    Participant

    Re: hotpoint FDW60

    had this a couple of weeks ago replaced pcb all ok, I was quite supprised pcb was less than 15 quid from htpt

    PAUL

  • Author
    Posts
Viewing 15 posts - 226 through 240 (of 287 total)
1 2 3 … 15 16 17 18 19 20