[hilly]

Re: ecogenie balls

cheers kwatt, that will just about do me

thanks paul

[hilly]

Re: hotpoint bwd129

finally got this sorted it was the module and the display module,
😀 😀 😀

[hilly]

Re: indesit widl126 w/d

cheers jj

[hilly]

Re: creda tcr2

still cant work this one out??? ive taken the base off and washed it out so its definatley all clear but water is still building up in the fan area below the heater its filling up the water container but still finding its way across somehow.!

help pls :bang:

[hilly]

Re: creda tcr2

timdowning wrote:When you say its still tripping did it work for a while after you changed the pump?

Did you change the heater?

Is it the heater thats low insulation?

didnt change the heater but it dried a load then on the 2nd load the water built up and tripped rcd 😥

[hilly]

Re: hotpoint bwd129

timdowning wrote:Did you change the door lock before you fitted the replacement board?

Did you pinch the connections to the board?

yep i tried both of them??? 😥 😥

[hilly]

Re: whirlpool awo10761

DentedPorsche wrote:Hiya,
Have a look at the door, is it sitting centrally in the door recess?
The hinge may have closed up a little moving the door to the right.
Open the hinge a little or trim the plastic in the inner door where the latch rests against to let it spring over a little more.

HTH
Brian 🙂

cheers i will give it a go 😉

[hilly]

Re: indesit di620 d/w

got no conclusion for this one gonna bite the bullet i think and go and deliver it back and tell them to get indesit in or buy a decent machine,
i hate being defeted but ive spent enough time on this one 😥 😥

[hilly]

Re: indesit di620 d/w

still baffled by this one we have tried another new pcb on it with no joy??
we had another pcb off a different model and tried that on it it wouldnt reset and was stuck on one prog but it did heat up!! so my thoughts are still with the pcb?? :bang:

????????paul

[hilly]

Re: whirlpool w/m

cheers bazza, i did mention that to the customer but she says it only happens on that prog. i will have another word with her,
thanks paul

[hilly]

Re: indesit di620 d/w

cheers i’ll go bang my head a bit more now 😕

thanks for the replies
paul

[hilly]

Re: indesit di620 d/w

the no’s on machine are 70316 0966 37303511100, and the no’s on the box of the replacement is c00143222 timer bit100.1 ‘f6’ rhos + n104504
hope this sheds some light on it

cheers paul

[hilly]

Re: hotpoint aquarius wd440

thats a strange one 😕 but i will give it a go,

cheers, paul

[hilly]

Re: smeg condenser dryer

eastlmark wrote:check your email Paul.

thanks for prompt reply 😀

[hilly]

Re: delonghi dfs901ss range modification

thanks for the replies, it just seems strange the customer says he has had this appliance nearly 10 yrs and this problem has only occured in the last couple of years! but it still looks good and to replace a lump like this wont be cheap! cant decide what to do at the min????????

paul :rolls:

[Author]

Posts