[hilly]

Re: hotpoint wdl520 nightmare!

billyblue wrote:Is it the spiral heater? if it is i would consider trying another as they are prone to earth faults, also you must clean the condenser filter. Also check the one shot thermostat is not open circuit.

cheers, done all that. still scratching my head on this one!

[hilly]

Re: smeg a1-2

cheers for the replies, fitted them today. what a nightmare 😯

cheers paul

[hilly]

Re: whirlpool error code

anyone?

[hilly]

Re: Whats the most annoying thing customers do?

i went to a intergrated zanussi wd the other day, as i arrived was told the husband had got it out for me, bonus i thought!! he had then moved it abot 8ft across the kitchen 😯 so i had to drag it back and refit it which was a right sod to do 👿 the repair ended up being a blocked filter :bang: told him to leave it to me next time.

paul

[hilly]

Re: wiring diagram req plz

cheers 😀

[hilly]

Re: bsh dishwasher circ pump

cheers 😆

[hilly]

Re: bsh dishwasher circ pump

DOH! this should have been i trade tech 😳

[hilly]

Re: looking for advice

ive had exactly the same thing this week, at a student property, it is the filter from the dryer! they have bought a replacement w/m but the sad thing is its the same model so ill be back in the near future for the same thing or the usual bearings or pcb.

paul

[hilly]

Re: smeg d/w salt light?

dougdotcom wrote:Possable re-set needed after filling with salt, not sure of re-set procedure

cheers, the only reset i know is how to stop and change prog.
anyone know of any more??

thanks paul

[hilly]

Re: smeg single oven stat

cheers think i ve missed the stat on this then 😳 😳 will double check thanksfor replies 😉

[hilly]

Re: smeg single oven stat

its a rectangular white ceramic block about 2″ long (ish) with 2 spade tags on it, im assuming its classed as a cut in for the cooling fan, the cooling fan on this model is (looking from the back) at the top left and the block is just next to it on the right.
i wish id took a picture now.
the original problem with this model is that the cooling fan has been staying on (for days if left) but as usual it was ok when i went, so i guess the stat was not opening as it cooled down..

hope this helps in my quest 😉

cheers paul

[hilly]

Re: belling classic simmerstat

cheers john 😀

[hilly]

Re: bosch t/dryer cutting outl

ive got the same model and same fault!!!
has anyone got any ideas??? ive just been on bsh and the module is £238.75 😯 😯 😯 so i dont wanna take a guess

thanks paul

[hilly]

Re: bwm 20

id have a word with tony @ emw they stock or repair them for this mod,

paul

[hilly]

Re: ecogenie balls

EFS wrote:I have a supply of snake oil which works much better.

Guaranteed to shift all stains,cure all ills and better than viagr@ 😉

Steve

did it remove the pink out of your shirt last season? :rotl:

[Author]

Posts