[HotDog]

Re: Hotpoint WML540 & WF561 door seal problems

Yes i have and they are a pain all you can do is try another seal or ask the customer to smear some lenor along the edge till it beds in if your lucky .I did have one that twisted the drum so beware

[HotDog]

Re: john lewis tumble dryer

sorry misinformation on last post customer had phoned JL to be told e60 was door lock check previous posts for e60

[HotDog]

Re: john lewis tumble dryer

e60 turned out to be door interlock

[HotDog]

Re: john lewis tumble dryer

thanks for info

[HotDog]

Re: hotpoint wd 9934p

A Quick cheap fix cut wires to timer hold soleniod it wont stop to heat but will work ok as jim says they are a bit past it and not worth spending any money on

[HotDog]

Re: hotpoint fdm550p

sounds like you had water in the base on the first fault i would check for a leak if you dont find a problem remove front panel check wiring harness behind the metal rod runing across wires break in this area

[HotDog]

Re: Hotpoint Tcl 780

check the pump housing for crud

[HotDog]

Re: blomberg 1301abb

thanks never used connect will check them out

[HotDog]

Re: wd420

And the fault is ?

[HotDog]

Re: teknic dishwasher mod se6tiegb/13

thanks martin will give them a call

[HotDog]

Re: bosch washer wae24165gb/04

thank you i did have look in error code book no joy

[HotDog]

Re: Indesit IWDC 6125 UK Ind c 80625050000 s/n 107272229 the

There is a a new thermistor now for these machines which will cope with the higher temp of the dryer p/n coo290251

[HotDog]

Re: Hotpoint FFA90S Fridge Freezer no Fan

I know some models suffer with corrosion on connections on the board

[HotDog]

Re: siemens washer fault

sorry should be f67

[HotDog]

Re: Whirlpool Washer/Dryer issues.

hi jim is the fan motor capacitor start had same fault on a bosch w/d turned out to be a faulty cap

[Author]

Posts