Forum Replies Created
-
Posts
-
Re: Error code Candy GO 1482
If all of the wiring connections are Ok then remove the new brushes you fitted and examine the contact face ends of the brushes.
They should be smooth and shiny. If the ends of the brushes or even just one of the brushes is not shiny and looks dark and pitted then either the motor is shot or you have used poor quality copies of the original brushes.Candy/Hoover machines have been using Chinese made motors for some time now and they do seem to be of inferior quality to the earlier Italian made motors.
Re: New Moderator
Might be a good idea to give Dave access to all the ISE forums and tech info. 😉
Jim.
Re: ISE10 drains after a few minutes, then turns off.
A full model number would help, only the very early ISE10 had a brush gear motor, later ones all 3 phase.
Re: Hotpoint dw pcb
Don’t think EMW touch dishwasher modules or at least have a very limited service but QER do.
Re: Bosch dryer flashing ‘Container’
eastlmark wrote:In a true Tim Downing shortcut way, the trap door can be accessed from the front once the condenser is out (easy once you see how it unclips) bit of kitchen roll to mop out the jelly, flush some water down to flush the stuff under the pump out and should be ok.
Brilliant, easy peasy. Thanks guys. 8)
Jim.
Re: Simon Barclay?
The name just seemed to ring a bell, spam filter caught it but you really need eyes in the back of your head these days.
Re: Hotpoint HE7L252PUK Dots on clothes
Fractured or corroded alloy drum support can leave marks like that.
If there is no sign of any major build up of gunge inside the pump filter housing or inside the door seal then as the machine has a sealed drum it looks like a drum change is on the cards.Re: Hotpoint FDUD 44110P Diverter valve
C00306342 = Kit motor washing alter 3 out PLP2+0-RI, at least that’s what Partfinder calls it. 🙂
Re: Whirlpool timer/control unit?
Thanks Dave, will check that out, may have to return to see if I can find the correct 12nc anywhere.
Re: Hotpoint washing machine not filling
No click in a digital pressure switch, blowing into it can damage it though.
Given what you have already tried then a new pressure switch would be the next option.
I know it might seem obvious but you have checked that have water coming out of the inlet hose?
PS, there is no accessible pressure chamber on these sealed drum machines. 🙁
