Forum Replies Created
-
Posts
-
Re: Hotpoint TVM65A Instructions
Do you mean a user manual. Although this machine will only be a few years old Partfinder already lists the user handbook as obsolete. 😥
Virtually the same as a TDC60 by the looks of it.
Jim.
Re: Is there a Miele “internal” filter?
andy_art_trigg wrote:A customer claims she has had to pay Miele engineers £100 to remove a coin from an “internal” filter and she thinks the same thing’s happened again. The only internal filter I’ve come across is the stupid Hotpoint one.
You have obviously never done a recent Whirlpool then. Some of those have a large plastic ‘cage’ in the sump hose.
Jim.
Re: Hotpoint DWF50 Sticking
From page 3 of the Known Error codes thread. 😉
Hotpoint DWF 50 & DWM55 also FDW60 dishwashers
Led 1 Intensive
Led 2 Normal
Led 3 Eco
Led 4 Fast
Led 5 Prewash
Led 6 Delicate3…..Overflow (water in base)-Leak from water line
4…..Solenoid valve fault -Inlet valve,connections
5…..Thermistor circuit-Thermistor c/w timer
6…..Timeout heating-NTC detached from casing
3+4.Timeout draining-Pump connections,blockage,module
4+5.Timeout filling-Tap off,Inlet valve,connections,timer,water turbine
3+5.Circulation pump not working- pump,connections,capacitor,module
3+5.Filters blocked-Mesh plate,filter or microfilter,pressure sensor
1+4.Software recognition error-Timer not programmed,wrong keypad
4+6.Heating circuit-heater,connections,module,relay
3+4.Hardware version (timer)Heaters are prone to failure on these so that would be my first point of investigation.
Jim.
Re: Hotpoint 7871
No problem Dave, see you are having to make do with the bog standard avatars as well. 😥 Now if this was V.Bulletin 😉
Jim.
Re: where to buy semi intergrated dishwasher?
I know this may sound like banging our own drum but if you can find a good local independant supplier you would be well advised to do so. You may pay a little more, but they will be more likely to be able to advise you correctly and help or even carry out the installation and fully test the machine for you.
If you give your exact location then someone may be able to point you in the right direction. London is a big place. 😉
Jim.
Re: Seasons greetings
Twoten wrote:You have defiantly made my life easier
We aim to be defiant at all times, particularly Martin 😆
I’m sure all the other mods and admin will join me in thanking you all for your kind words, 😀
Remember, it is a fool who thinks he knows everything, a wise man knows when to ask. 😉Jim.
Re: bosch/hotpoint d/w
boro wrote:If you do a search, the different approaches and methods have been discussed many a time.
Particularly the ‘upside down, legs in the air ‘ method. :rolls: 😆
Jim.
Re: bosch wta4107gb/01
Is this a Gorenje job Chris? I was gobsmacked at the price of an element for one of these masquerading as a Bosch a few weeks ago.
Jim.
Re: Hotpoint WD420
Remove the mains plug and then remove the two screws at the back of the lid. It is often hard to remove but a sharp rap on the front edge usually shifts it. If you look inside you will see the valve assembly on the other side of the inlet hose, if this has three pipes leading off it then it is a 3 way valve and so on.
Jim.
Re: bosch wta4107gb/01
Why not use this facility. http://tinyurl.com/yhaw7h
Click the manufacturer and away you go. 🙂 don’t forget the all important E-Nr number.
Jim.
Re: bosch/hotpoint d/w
Model number would help, slightly different technique required on slimline models as opposed to full size.
Jim.
Re: hotpoint dwm 55
Try the Known Error Codes thread at the top of this forum, page #2 post by lotusray.
Count the neons from the left to right to give you your error code.
Jim.
