Forum Replies Created
-
Posts
-
Re: Zanussi sus units
Was only able to get the 132 type from local shop in Fuengirola to compare. Can confirm that peg hole is smaller on the 132 one. Guess that may be for the later sealed drums?
Re: Zanussi sus units
Having looked closely it looks like the hole for the pegs is a different size.
Re: 75/400 Creda tumble dryer (bought 1978)
Thinking back, some of these old stagers had a rod from back to front on either side secured with a small nut, has this got them?
Re: Indesit washing machine WIL143s
Possibly worth checking for loose connections on the the heater ntc and main circuit board first.
Sent from my iPad using Tapatalk HDRe: Indesit washing machine WIL143s
Ignore the doorlock light and check HERE
Same codes as your machine.
Would add that if it is F08 then I for one would not even go out to a machine showing this fault. 😉
A search of this forum for Indesit and eight flashes will give you some idea. :rolls:
Re: AWOL
Well the daughters wedding in April made a huge hole in the cruising budget. I have some good friends who live in Fuengirola and I am going to stay with them for just over a week. 🙂
Have booked a cruise to the Canaries in October though. 😉
Sent from my iPad using Tapatalk HDRe: Hotpoint dishwashers fires
I would say on average that there is a report of a fire caused by a domestic appliance at least once a month in the Oldham Chronicle, mainly tumble dryers.
Sent from my iPad using Tapatalk HDRe: Hotpoint Aquarius SDW60 tripping mains as soon as plugge
Could be the mains filter, could also be the wiring from the mains filter up to the on/off switch.
Usually a failure of the filter shows physical signs of damage, black burn marks or cracks in the filter itself.
It is located at the point where the mains cable enters into the machine.
Not something I would advise a complete novice to attempt TBH.
Re: Creda Cordialle oven broken door handle
That’s the best I can do without any proper model number. It’s a white handle, it looks like yours and it is for a Cordialle.
Re: Old Indesit WN1069WG Spider
So are going to continue to pick holes in my perfectly valid analogy or give the OP your honest opinion. :rolls:
Re: Old Indesit WN1069WG Spider
We are talking 20 year old Indesit here Martin, not the Queen, be sensible and give the OP your honest opinion. 😉
And the part is listed as obsolete on Partfinder.
Re: 75/400 Creda tumble dryer (bought 1978)
I suspect that POL 08 will be too big, I think Martin is much nearer the mark with a POL 03.
A picture of the belt orientation for you.
Re: Old Indesit WN1069WG Spider
No substitute, no chance of a used one, most would have corroded years ago and no one would strip one down for this part.
Putting a new one in would make much sense as giving a 90 year old a heart transplant. 🙁
Sent from my iPad using Tapatalk HD
