Forum Replies Created
-
Posts
-
Re: Return to work
if I can help at all give me a wee private message n I’ll give you my number, I can often be found around ayrshire, central n lothian. Cheers n best of luck
Re: LG washer jumps
If its the direct drive version possibly erratic motor action ( ramping too fast ) due to a faulty ” hall ” sensor on the direct drive.
Re: Daewoo American Style fridge freezer
Very Very prone to faults with the upper damper ( flap ) replaced loads of them lately on newish Daewoo/Bush/Haier American FF’s
Re: Integrated dishwasher UBDWI60M
it is a cata and the four lights mean flooded base and/or failure of float microswitch( and /or of course main board failure )
Re: LG D1453WF dishwasher blows trip.
leaks into the sealed base getting into everything and anything……
Re: LG D1484 AE fualt code and leak
unfortunately your right access must be gained by either removing the tub or removing the sump. Neither is a job to be taken lightly or for the faint hearted.
I’m all for people ” having a go ” but in this instance without product knowledge and technical info on how to access the various components I think you’ll struggle.
Re: LG 207TUJA intermittent beeping
might also be a misalignment of the magnet on the top of the door with the reed switch which operates the light when the door opens. Alarm may be ” door open “
Re: Daewoo FRAX22D3B
very much so especially top one they fail all the time from 3 weeks old onwards !! they use the same one as the bush side by side americans.( the damper incidentally not the sensor. )
Re: DE DIETRIC DFS620JE
on the front of the evap ( right at the top of the freezer comp ) theres a drop down flap hinged at both sides , put a scraper of flat bladed screwdriver between the top of the griull and the roof of the freezer and easy the flap down , you can now pop the right and left hinge pins out the holes in the liiner and remove the flap . The bottom of the evap housing can then be eased forward and down to remove it ( take care not to break the drain channel attached to the bottom cover which goes thro the rear of the freezer ) from there on in its fairly staight forward you can lower the evap and get access to the stuff behind.
Re: bush a126qb
Does that if one of the wires from the motor plug into the taco/stator or brushes is broken. Surprisingly this is a common fault the biggest culprits are the taco wires or the white wire going to the thermal fuse although the black brush wire sometimes breaks too .
just as an afterthought I have had customers accidently activate the child lock messing about with buttons trying to get the machine to start , might be worth a check first.
