Forum Replies Created
-
Posts
-
Re: Whirlpool sensor rear vent dryers awz 3518 no heat
these dryers will not work if ambient temp is below 5 degrees..
John
Re: UKW Meeting February 2009
Lawrence wrote:also for interest Malcolm Knowles is attending
I have also inivited Bernard Madoff to give us some investment opportunities and advice on our pensions and stocks etc…
He said he might not be able to make it as he is stuck in the house at the moment…:rotfl:
John
Re: Whirlpool H Duty T/Dryer
iadom wrote:Ah, so the info should be on the SIOS disc. 🙂
Jim.
Hi Jim,
If you go on SIOS and want to search for this model remove the 3R at the start of the model number, and it will come up.
John
Re: Whirlpool oven door glass AKZ451
I forgot, I need to know if it is double or triple glazed also.
John
Re: Whirlpool oven door glass AKZ451
Hi Paul,
That is the model number, IIRC the serial starts with either 14*** or 39***
John
Re: Whirlpool oven door glass AKZ451
There is a modified hinge kit for the new glass, let me know the serial number and I will get the part number for you.
John
Re: Fisher & Paykel “DishDrawer”
The wash motor goes in reverse and speeds up to empty. The heater is the blue coloured metal plate that you see between the wash motor and the bottom of the basket.
JohnRe: Whirlpool AKP511 help please….
Firstly the oven and the hob are two seperate appliances.
The autotimer on this oven has to be set before any function can work and it sounds like it is knackered. There are 13 different versions of this oven so we will need the 12nc number to source the correct part number.
The 12nc number is on the r/h side profile on a barcode sticker, number starts with 85****Some of these autotimers are now obselete and they were always an expensive part so it might be time for a new oven.
John
Re: Well, that’s another one gone then…
Happy new year to all, lets hope it is better than last…
A thought for today 😆
New year resolutions are simply cheques that men draw on a bank where they have no money in their account.John
Re: s20brsb21-a/g
Couple of points to consider here.
Are you sure about the serial number? this is one of the 1st models of the side by side and most were fitted with the original boards ie: before week 30 2003. IIRC the older back boards have a black plastic cover and the newer one have a cream coloured coverIf it is one of the later ones chattering can be caused by either the front, back or both boards
Most times it is the back but I have had a few with front boards only causing this problem.
Part number for front board (bare PCB) is 481221848184John
Re: Whirlpool 20RI-DE4 American type fridge/freezer.
It is a john Guest type fitting, look at the picture HERE. To remove grab it in the centre of the straight connector and push the dark grey collar towards the centre whilst pulling the pipe. They can be a bit stiff at times
John
Re: Etna Dishwasher circa 1987
It is a Whirlpool. Model 85451390141
Probably a dodgy timer, I had a few where the cog on the timer motor would slip and it would stop the programme.
John
