Forum Replies Created
-
Posts
-
Re: Whirlpool AKP511/1X/02 Single Oven
Sounds like a thermostat problem, this one HERE should sort your problem
JohnRe: fisher paykel oven
I have done hundreds of F&P ovens over the years and can’t recall ever changing an oven stat that was dodgy, good part is spares are readily available and not to expensive. If you do not have an account with F&P you can buy spares from ASD
Will need full model and PN number to get the correct parts.
John
PS: be careful taking oven out, they are bloody heavy 😆
Re: Spam
Can someone delete user “calmglale”
copy of users 1st post which I have deleted belowStart taking Penis Enlarge Patch and dumbfound her with your size. On your question there is an answer! More Products – http://www.dybok.com
Re: Whirlpool G2P90F/SS oven
Sorry dave, Missed your last post.
Not many temp sensors fitted on these they are usualy pretty reliable and accurate, if oven not getting to temp I would go for the ccu.
One thing worth noting, how long was the oven on for when the temp was taken, it will take at least 30 minutes to get up to 200. It could also be the hinges, sometimes they get weak and there is a noticeable play at the top of the door causing heat loss.
John
Re: whirlpool AKZ451/x/01 85845115075
two different outer door glasses, need the serial number to be sure.
JohnRe: Ignis ADL348 3 flashes – Control board or NTC
Chris was right, the programmed board is 481221838401.
Follow the link to “find a spare part” below for prices and availability.
John
Re: w/pool adg642
Tell him that there is a few spare model number stickers under the door, if he opens door fully and looks underneath they are on the front of the access panel to the base.
John
Re: w/pool adg642
16 different versions of ADG642 and they all start with 8542 769 15***
I cannot find yours on Sios or the Whirpool tech site.John
Re: Ignis ADL348 3 flashes – Control board or NTC
You have bought a blank control board. These boards are for Whirlpool engineers who have a computer that can program it to work with different models.
There are 4 different models of your machine and they are two different control boards that will fit. To confirm what board is required post up the 12nc number from the r/h side of the inner door and I can get you the correct part number. 12nc number will start with 8545348*****
John
Re: w/pool adg642
That part number is for a blank timer, looks like the wrong 12nc on your 1st post, get the correct one and I will let you know the number for a programmed PCB.
