Forum Replies Created
-
AuthorPosts
-
johnmac11
ParticipantRe: Ignis Dishwasher ADL834 WH
Eight different versions of this model but only two timers across the range, need the 12nc number to get right one.
John
johnmac11
ParticipantRe: F&P Dishdrawer Spares manual
you have mail
johnmac11
ParticipantRe: Whirlpool USA T/D Parts Required
on the back of this dryer there are two stats and a thermal fuse, the thermal fuse is probably the one you want, it is the nearest component to the blower wheel and has a red wire on one side and a tan wire on the other. This fuse should be c/c. part no: 481925228095
The stat with four wires is the operating stat, the two violet wires should have a reading between 22.4k-33.6k the red and white/ red should be closed circuit. If the operating stat was faulty the dryer would still turn, very rarely goes faulty.
John
johnmac11
ParticipantRe: Whirlpool USA T/D Parts Required
The fan wheel 481951548051 and the resistor is 481912118255.
I have never changed the resistor on this model and have probably came across hundreds over the years, before ordering I would check the continuity of the stat next to the fan. Every time I have a dead one this is the problem.
If you send an email to spares@ukwhitegoods.co.uk Dave will sort out the parts for you.
John
johnmac11
ParticipantRe: Whirlpool AKZ451/1X display for grill wrong
Seamy wrote:AKZ 451/1X 03 is what has been reported back to me.
In that case remove the resistors numbered 2 and 3
Johnjohnmac11
ParticipantRe: Whirlpool arc1738 tall fridge
not 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} certain but looking at the handle I would say it is not reversable. If it is reversible it will tell you how in the instruction book.
Johnjohnmac11
ParticipantRe: Two site members get married!!!!!!!!!!!!!!!!!!!
robdray wrote:Or is it pleasure …
I was there and he didn’t complain to much 😆
Johnjohnmac11
ParticipantRe: World Cup 2006
Penguin45 wrote:I’ll plump for 2, probably from Scotland :rotfl: .
You are wrong Chris, first post from England, well nearly :scots:
Does Posh get a new credit card now?
John
johnmac11
ParticipantRe: Two site members get married!!!!!!!!!!!!!!!!!!!
On the serious side of things it was a good meeting last night with some serious planning done in advance by Ken and Kevin :worthy:
Just wait to see the pictures from the Xmas bash 😈
Johnjohnmac11
ParticipantRe: Two site members get married!!!!!!!!!!!!!!!!!!!
Penguin45 wrote:There are no pictures of the earlier scene of our Kev leaving the restaurant trailing a dining room chair behind him (to the consternation of the staff!),
What like this,,,,,

johnmac11
ParticipantRe: Whirlpool AKZ451/1X display for grill wrong
It is a modified part but the good news is that I checked one that I have in stock and this board has the resistors that need to be removed in some models.
If you fit the board without removing the resistors it will cause all kinds of wierd and wonderfull faults 😆If you look on the the rating plate to the right side of where it says AKZ541/1X there is a number between 1 and 39 printed, If you let me know that number I can let you know what resistors to remove and this should cure the problem.
Johnjohnmac11
ParticipantRe: UK Whitegoods Meeting – Feb 06
iadom wrote:That could have been taken just a few hours ago, 😉
Dont think so Jim, A couple of hours ago none of us was standing 😆
johnmac11
ParticipantRe: Whirlpool Cooker AKP510/WH/01
Hi Nick,
thermal fuse is 481925228078
oven stat is 481228228227John
johnmac11
ParticipantRe: Whirlpool AKZ451/1X display for grill wrong
This appears to be one of the newer type ccu’s that dont have the links. These boards can be reprogrammed using the SAM module and it sounds like either faulty software or the wrong board fitted.
post up the 12nc number and also the part number that was fitted and I will check when I get into the office in the morning.
Johnjohnmac11
ParticipantRe: New PC’s.
God Ken, dont start on this subject!!!
I have a simple way of dealing with this.
On the office server always back up Astro, email and my documents.
On the home pc put anything of any importance in my documents and back up daily.I find that once every 6-9 months I have to flatten my home computer ( Windows XP ) due to software problems, and I never trust the files and settings transfer wizard to restore my files. As far as I can see its a problem associated with the crap that comes in with the web.
But in saying that I purchased a new server 2 years ago, top of the line Compaq Ml370 came with 2 power supplies, 2 video cards, 2 Xeon processors and 6 scsi hard drives in a raid mirrored and stripped and it is the dogs bollocks, just logged on and checked and it has been up and running for nearly 2 years without a reboot. Had a problem with a power supply last year and HP sent me a new one, plugged it in hot with no probs at all.
Point being, buy a bit of quality and be rewarded with no hassle.
John -
AuthorPosts
