Forum Replies Created
-
Posts
-
Re: wia 101
Jim the later one can only be used with a lap top but the earlier one can still be used on any machine, but you need an adaptor that for these such as the Wia101 with the module in the console, it plugs in via an edge conector and you plug hardware key into it. jj
Re: Hpt WMA 10
The 1603557 board is prone to this fault and no sign off blown tracks, i’ve changed a good few after trying door lock.
Re: Hotpoint Dishwasher BF31
Check the sump hose between metering tank and sump if it is gunged up it will, cause the safety shut off to activate.
Re: Indesit Domed Torx Pulley Bolts
I,ve used same bit for years and never snapped it, i usualy give the bolt a couple of good whacks with a cold chisel to get it started then they come of easy peasy.
Re: indesit dishwasher
Had a couple off capacitors going o/cct swapped them from a good motor never been back.
Re: wma tub
Yes rear half and support there are some engineers doing bearings but not a lot, an ex supervisor now back on the road i’ve heard is doing them he is also a top seller in the cleaneasy range, thats his choice i suppose most guy’s couldnt give a s£$T.
Re: wma tub
Dont know anybody in this area who have or use the bearing tool, i got issued whith wma bearings and they were in the next return to the stores, as for 1 slot if he is doing them in 1 call more fool him, it is still 2 slots if we dont get the 2nd slot it just gets rebooked, i think he must be looking for the extra £10 or so for doing in 1 slot the company love engineers like that.
Re: old hotpoint d/w
If it leaks from the breather hole in the metering tank, you will prob,ly find a partial blockage in the sump hose a good clean out normaly does the trick. ps If it is this it only leaks on the third fill so it isnt easy to find.
Re: Ariston chucking water out of soap drawer
Nope thats what they do usualy its a choked sump, or a blockage in drain hoor hose.
