Forum Replies Created
-
Posts
-
Re: Hotpoint washer 1 minute left
i would reckon its the drain hose to low thats the problem rather than the element.
Re: Hotpoint washer 1 minute left
i,ve found usual the heater or the drain hose to low or stuffed down the standpipe works on some programmes but on others it sits all day and doesnt finish, jj
Re: 1st for service
Done half a dozen cookers for them, was a wee while before i got access to the portal but easy to use, they phoned today for bank details to pay up so heres hoping i see some dosh soon.
Re: Hotpoint Aqualtis seal clamp?
You should try changing a dispenser hose on the 11 kg machines, some smarty pants decided to fit a retaining screw on the front of the drum, making it a nightmare to remove, youve got to love Indesit design engineers ????
Re: Zanussi ZWD1270S not drying
I had a similar fault on one and it was the inlet valve at fault fitted a new one and worked a treat, jj
Re: Hotpoint HFT187WP F/FZR Ice
There is a mod on these between certain date codes replacing the multiflow kit think the kit for that one is C00302507
Re: JTM struggling?
Got a strange phone call today out the blue from this guy jason@first4service.com
saying the WTA gave him my details about doing work for them on Bush ovens, and he would pass a couple of jobs onto me, i asked him to email me details first as i was busy, i then got a couple of automated phone calls with call details, as i was driving and in traffic i couldnt take them down looking at the email it looks like a JTM type operation with portals for looking up parts has anybody come across this company cheers JJ.Re: Indesit LFT114
Nope all in one hinges think you might need ser n/o to get the correct hinges 2 types on these i’m sure, jj
Re: Indesit IWME126UK module
Twoten wrote:Thanks iadom,
I originally checked with Connect who said I can use a C00270972 module and advised it was programmed!
I fitted this module and obviously didn’t work.
When fitted the machine returned a f09, eprom/setup error.
I will see if I can get a module from EMW. Do you know if this is likely to have damaged the fascia PCB?If it is not programmed it will throw up an F09 fault, i think connect are telling porkies here.
