Forum Replies Created
-
Posts
-
Re: Belling 444447311 main oven selector switch
Panic over sussed out where i went wrong it’l teach me i usaly take a pic to make sure?
Re: Belling 444447311 main oven selector switch
Help! does anybody have a wiring diagram for this switch think i,ve got one in the wrong place JJ
Re: Hotpoint Aqualtis PCB Change – Help Please!
As it happens, I do have a PCB which I salvaged off a machine with a drum issue. It came off an Indesit integrated one with the stainless steel sealed tub (model WM12X)..
I dont know how they look the same the Aqualtis has a big heat sink on it and is a 3 phase machine and evo2 version , the WMX12 is a single phase evo1 and no heat sink, ???????? Confused i am?
Re: Hotpoint FF72S not cold enough
Change the evaporator thermistor usualy cures it other than that might be fan motor even though it runs in test mode, they sometimes are faulty.
Re: hotpoint w/dryer bhwd129
Plug a thermistor in dryer and try again, and check the dryer element these cause weird faults, also carbons wearing down can upset arcadia modules.
Re: AMANA AC2228HEKB
I had a similar problem a couple of years ago i was advised to use code05 by Johnsdad on my one and it worked hope this helps JJ
Re: hotpoint LFT228 F12 Fault
Communication fault between the 2 modules could be board or duff connections
Re: hotpoint wdl540 washer dryer
What is the ser no as after 106******* if it has only got 4 wires in the harness from the main pcb to the console module it will have to be changed to a 5 way harness when the module is changed as it will work once then not switch back on part no C00271414, jj
Re: Card Payment Machine.
I was using pay leven via my phone 2.75{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} interest which i thought was okay but they pay in from a foreign bank, so i was also getting whacked for a chaps payment from my bank every time they paid, i got onto them and they reimbursed the payments as long as i gave them proof, but i have given up as i cannot be bothered with the hassle, thing is it worked a treat everytime i used it.1
