Forum Replies Created
-
Posts
-
Re: Whirlpool ADG 290 dishwasher Fisher Paykel (twin draw DW
as above sounds like an F1.
You have to make sure the area around and under the mains filter board is bone dry, and that the board has no corrosion/damage.
Once the board is out for inspection you can push a screwdriver under the board chassis gently and it will lift from the base so you can get some kitchen roll underneath .Worth checking
1 Abnormal load ie something obstructing the lid closing properly.
2 Lid motors
3 Link support broken causing 1
4 Leak from inlet pipe/waste pipe mice like the waste pipe
5 air flap in spray arm
6 Impellor on motor looseI love them and I get to work on them every day 🙂
Re: Fisher & Paykel DD605HSS
Thanks Chris but I thought it was going to be the service manual for the 605.
Thats the 603 a few things have changed since then 🙂NEW fault codes, display, heater, m.f.b, tub,control module, wire cover, motor rotor, and over bits.
Very few bits that are backwards compatible now
I have a printed copy in the car but not on my comp.
ta JohnRe: Fisher & Paykel DD605HSS
OOh I have a hard copy in the car any chance of a wee mail Chis?
taI went up for a wee bit of training on the 605 and some newer appliances the other day, very interesting. looks like a lot of problems have been addressed .
Re: Cannon 10400g , 10401g how different?
Thanks for the info 🙂
Just seems a shame that a miscommunication has cost her 1k.
Nice lady too, I just said I will find out what I can for her.Ta John
Re: Cannon 10400g , 10401g how different?
But could the ffds be replaced for lpg versions? so if the pipework and holes are same size which I am sure they would be should be poss?I have seen them for £50 each on e spares.
I know it would be a crappy job to do but just giving her all options.
Re: Bosch HBN131550B/02 oven
Bit of a long shot but I seem to remember this model has a magnet in the door top right side which activates a magnetic switch just under the fascia so the oven will not work with door open.
Reason I say this is I had one once where the magnet had vanished so nothing would work.
JohnRe: Whirlpool pcb query
on some I am testing on the led version C comes up in the display
ie CC C and beeps. so is this either wrong front board or lcd type board thanks.Re: Whirlpool pcb query
robwash wrote: However there has been a software change so some of your boards may not tally up with the newer models.
Hi this is the problem, at some point whirlpool changed the rear board compatability with the front board.
The numbers are from the boards as you say John and 1 maybe 2 are from the lcd version.
As for looking similar the differances are mainly board colour and capacitor style ie old white ones that fail.
Re: Whats the nicest things customers do?
Nicest customer was a lady who had a problem with her F&P dishdrawer,
the code related to the motor and a common fault was if not used for a while the motor would stick .I told her how to free the motor over the phone and next day she turns up with 8 bottles of my fav beer 🙂Whilst working on his dishwasher another older gent gave me a bottle of champagne when i told him I was recently married.
Re: Whirlpool AWR 213 pret a porter
Thanks for that John answered a few questions.
parts are no longer available from whirlpool themselves.
bacj to the drawing board.Re: Bosch oven and induction hob
Engineer Has got back in touch saying “the technical department has said thats ok .”
Now just got to pin down a call out time which means I am stuck without an oven for at least another week.
In theory I could get the part and install it in no time but gotta love the 2 year g/tee.
🙂
Thanks JohnRe: Oven Cleaner
Of the various cleaners I have tried over the years there is one called Oven Pride.
Comes with a bag to soak racks in and it very nearly works 🙂
