[keithwilliams]

Re: whirlpool 3lsr6233eq1 motor capacitor.

yes it is.
thanks very much.
i havent used connect for years so maybe should reopen an account.

cheers

[keithwilliams]

Re: Bosch field coil wrong way round?

oh yes and i knew to mark the coils before dismantling it.

[keithwilliams]

Re: Bosch field coil wrong way round?

i did fit longer carbons to a “professional standard” on my own £1000 machine.

[keithwilliams]

Re: Bosch dishwasher

its a shot in the dark, but check the plug in mains suppressor at the terminal block.

[keithwilliams]

Re: smeg dwf 64 ss e

yes most likely diverter valve usually e8 fault

[keithwilliams]

Re: Bosch field coil wrong way round?

i know its too late now, but why not just solder in new carbons/ ive just done my own machine the other day. fixed for £1.95!!!

[keithwilliams]

Re: 240V constantly to heating element

id suspect that the contacts in the heater relay have welded together. should get away with soldering in another.
happens often on beko dishwashers

[keithwilliams]

Re: Lamona HJA8630 dishwasher – all programme lights on

yes its the pcb. have replaced a few and keep them on van.
good news is that they aren’t expensive. your dishwasher is the same as a beko dw600. and dont be put off by it being a beko. i personally think they are the best value dishwasher to have.
smeg pcb are about £150 trade yours is about £16.

[keithwilliams]

Re: bearing kit bosch 181927

hey don
thanks. you obviously know your way around bsh site better than me.
keith

[keithwilliams]

Re: Lamona HJA 6740 Temperature Control

can you please let me know the outcome of this problem. i have a customer who rang in this am with same symptoms.
much appreciated
keith

[keithwilliams]

Re: IKEA DWF B10 Dishwasher- Flashing light

the diafragm on the switch in the sump is probably gunked up. its located on right side below filter cover. it is a mesh circular in shape. if you are lucky you could remove all water and then fill sump with boiling water from a kettle. give the gunge a chance to soften and the GENTLY agitate the mesh with a washingup brush.
it may just work. if not its best to replace the switch.

[keithwilliams]

Re: whirlpool awod4505 cant get up to speed

thanks for that i’ll have a look.as always the awkward ones belong to friends.

[keithwilliams]

Re: Beko DRCS68W

yes i agree. i do this for a living and i forgot to reconnect the heater when i put one of these back together.

[keithwilliams]

Re: Bosch oven problem

a possible solution is that the timer unit has burnt out. i only say this now because on thursday i came across this fault on a bosch range cooker. the connections to the timer had overheated and broken the circuit.
if you do need a timer i think the part number for yours is 423978.

[keithwilliams]

Re: Beko – carbon brush uneven wear?

i had one couple of weeks ago. the carbons were in green holders. it did look like one was worn right down but in fact had got stuck. it took a bit more than usual effort to push it out.

[Author]

Posts