Forum Replies Created
-
Posts
-
Re: Dead Indesit WIXL123
Is the door locking and the light not coming on?or the door not locking at all.
If it is the former it will be something to do with the motor circuit,broken wire more likely than brushes at this age.
If it doesn.t lock at all then could be pcb,you could always get an idea off one of the mods regarding price or………..
I will whisper this bit
Get indesit out to it for a hundred quid all in.Re: Hotpoint Possible turmoil?
Yey bring it on let the pasta barons bollocks up Bosch now!!!!!
I suppose it is too much to hope that Bosch take on Indesit rather than the other way round,if only to get rid of the management structre that is running sorry ruining this company.Re: indesit ide 1005 dishwasher
Did the machine megger out ok?
I would think it was the motor down to earth.Re: New Hotpoint Aqualtis noisey
You could refer her back but i would be suprised if they would come out for nowt.
Weights come slack on these and the belt can cause some noise,pump also prone to a bit of chugging.Re: Why can’t they all be like this?
There is a kitchen fitter round my way who installs all integrated appliances on a piece of worktop or mdf sledge.They are also fit with a seperate plinth,these things come out easier than most freestanding appliances!
If he wasn,t such an ugly git I could kiss him.Re: Hotpoint Aquarius Extra WMA44- Door light flashing Help!
Behind the console panel.!
Power off and plug out.
Top off (machine)
Remove dispenser drawer and you will see 3 screws,remove these and the console is now loose.
Make a note of where all wiring goes before you unplug anything.
Release the pcb from the plastic clips and if helo is right(which i am sure he is)you will see one of the trace circuits on the board has blown.Re: Indesit W123 error code 11
Imagine how bad you would have felt as you plumbed in your new £300 washer and found that button in the pipe. 😳
Re: who to work for now
I know this is not ideal,but Indesit are seeking a franchise in the south cumbria/Barrow area.If anyone is really desperate it might see them out of a bad patch.
Re: best toolboxes?
I had one of thse CK cases but the zips broke after about 6 months(probably something to do with all the tools in it!)
I have got a Dewalt bag £30 from B&Q and it is brilliant big enough for all your gear and you can throw parts in as well,big comfy shoulder strap as well.
Deltra if you are stuck on cases drop me a pm as I have an old Hotpoint one sitting in the garage you could have..Re: Hotpoint WD420 dryer problem
Try changing the wash heater thermistor and the heater box thermistor first.
The thermistor on the wash heater controls the dryer as well.
(if I remember right)Re: Was it you ??
I am going to a mad bitch tomorow who has threatened to lock me in if i dont fix her dishwasher!!!!!!
I hope she does then I will be rid of the neurotic old trout forever!!Re: Hotpoint 7822 not draining.
Yes there is a seperate pump and it will either be blocked or has failed altogether,they are not a bad job to change,though can be a bit pricey.
Re: Indesit franchise
The prices are exactly the same they have not gone up.
My advise is DO NOT DO IT!!!!!! When things go quiet in whatever area you are in they will turn off the tap immediately and you will be left with no work!!
The only guys I know who are doing alright by it are blokes employing 4/or more engineers as I think the rates are higher then.
