Forum Replies Created
-
Posts
-
TBH, people would forget to search. You’d have to try to automate it in some way and whist that’s’ not too hard, getting enough people to use one system is.
K.
I can’t find anything on that model anywhere but, it does look to be a current one still in warranty and that could be why.
K.
These are a nightmare to diagnose. 🙁
There will be a sensor to operate the fans but, where it is etc I have no idea and on some, they will be embedded within the induction zones which are not a cheap thing to replace.
K.
At the moment, sadly not I’m afriad. It is a very low use item (maybe one or two a year) so I doubt anyone will keep a kit.
K.
Sadly, you would need the model (preferably the PNC) number off the model that had the rails that fitted in order to find them.
There’s scores and scores of models, not all are the same and not all the telescopic runners are the same used in them so, whilst not quite a needle in a haystack to find, it’s not far off.
K.
Lawrence found a filler that could do it, he’s had to do a number of them but I forget what filler it was but he said it worked every time.
K.
No, I am afriad that the fitting kits are specific to each cabinet and they are not interchangeable so you will need to use the kit supplied with the new machine, the old fittings will not work.
K.
There are multiple versions and changes inside of those so the codes are needed. Probably about 12 or so versions of that model.
But the ice/water dispenser is dumb, it just feeds back to the main module what’s needed and that does the work.
There’s a valve on the back that brings the water in, if that fails the tank won’t fill and you’d get no water or ice and likewise, if the tank freezes it won’t work. After that you’re into the module and wiring. Wiring on some can be a thing though, it can fail.
K.
Sorry, I can’t read the info on that label as it’s too small.
It could be a problem with the door panel but I’m guessing without knowing what unti it is.
K.
BCD535 isn’t a valid model number.
This is how you find the info you will need:
https://www.ukwhitegoods.co.uk/help/spare-parts/finding-parts/4355-hisense-spare-parts
K.
About all I can think of is an earth leak somewhere, but finding it will be a nightmare I suspect.
The fastest way, if possible, is try to work out what’s energised when the problem occurs to try and narrow it down. That said the main oven not firing up at all is a bit of an issue unless it’s on auto or the clock isn’t allowing power to it assuming that the switch is okay.
K.
If I recall, they changed those elements and that is the replacement for all of them and has been for some years. They do fit, apparently, but I’ve not done one myself.
K.
