[lerch]

Re: Beko WMA1613S – spin speed?

The machine is a pig for out of balance and will reduce the spin speed. Try with 3 large towels in if it spins ok then customer is more than likely overloading.

[lerch]

Re: Samsung SRS2029 water supply pipe

Part number for sbs srs2028 is DA7300070C sorry not sure of price but part number should be the same.

[lerch]

Re: REDUNDANCIES AT COMET

We lost 1 engineer today but we are really busy booking 5-6 days ahead and we have 20 eng’s doing 10-12 calls a day. ??

[lerch]

Re: Siemens WDI1440GB/04 Error code

Think e01 is door open issue. 😕

[lerch]

Re: Hotpoint CTD 80

Pump part number indec00260640 new style. 😀

[lerch]

Re: whirlpool awz512 857594615000 completley dead

check the motor.

[lerch]

Re: to fix or not to fix???

When I rang up corgi before I was told as long as you do not break in the gas rail you are allowed to work on gas appliances.

[lerch]

Re: Candy CMD146 problems, and more problems….

Hvr / Candy have had a long standing problem with there heaters causing some lovely weird faults. Have you tried a test cycle ??

[lerch]

Re: LG dishwasher ld2060sh

Check your email. 😀

[lerch]

Re: FJS 1225w

E85 is circ pump, wiring or pcb hope this helps 😀

[lerch]

Re: Hotpoint WMT03 Door Interlock light flashing

Have you checked the motor??

[lerch]

Re: WMA36 valve kicking during spin, after major sump blocka

I agree with A1 had the fault before and was blocked, item would move and cause machine to ask for water.

[lerch]

Re: Candy CDi1012 fault code

How many flashes on the led this will give you the error code. Any other letters after CDi1012 ??? or what is product number/serial number first 8 digits.

[lerch]

Re: zanussi wjs1265w washer dryer

E10 is normally dryer valve.

[lerch]

Re: zanussi wjs1265w washer dryer

I have had e20 fault for the temp sensor at front.

[Author]

Posts