lerch

Forum Replies Created

Viewing 15 posts - 91 through 105 (of 353 total)
1 2 3 … 6 7 8 … 22 23 24
  • Author
    Posts
  • May 12, 2009 at 9:01 pm in reply to: Merloni Smart Card Readers #286455
    lerch
    Participant

    Re: Merloni Smart Card Readers

    There is one for testing ver 1 / ver 2.

    There are two keys for programming.

    The first key for programming blank pcb/eproms is clear.
    The second is black but will require hotpoints software to write to pcb’s

    The low end adaptor has 2 versions depending on model / age so I would just do what squadman suggested.

    May 8, 2009 at 9:30 pm in reply to: Bosch washing machine 1 Minute to go #286041
    lerch
    Participant

    Re: Bosch washing machine 1 Minute to go

    As above last one I did it was the heater, changed and problem solved. 😀

    April 22, 2009 at 4:01 pm in reply to: Zanussi Jetsystem FJS1225w. error and lights flashing #283856
    lerch
    Participant

    Re: Zanussi Jetsystem FJS1225w. error and lights flashing

    Did it empty ?

    April 22, 2009 at 1:03 pm in reply to: Zanussi Jetsystem FJS1225w. error and lights flashing #283854
    lerch
    Participant

    Re: Zanussi Jetsystem FTS1225w. error and lights flashing

    FTS is for microwaves I think double check model details as fts1225w is not listed on zanussi website and get pnc number makes life so simple. 😀

    April 22, 2009 at 12:57 pm in reply to: Candy Eco system #283678
    lerch
    Participant

    Re: Candy Eco system

    32042509 C4400W (UK)

    I would double check serial number as the only one close to the number provided was the above one.

    What service info do you want??

    April 21, 2009 at 7:29 pm in reply to: Hoover HDV7FM Wiring diagram required #283804
    lerch
    Participant

    Re: Hoover HDV7FM Wiring diagram required

    Missing zero should be 31100022 but pm me your email and I will forward you the manual + wiring diagram. 😀

    April 17, 2009 at 9:17 pm in reply to: Beko WMA510W No Spin #283416
    lerch
    Participant

    Re: Beko WMA510W No Spin

    How old is the machine ? as when these first came out the boards were abit sensitive and required new updated boards as there would only tumble and not go into a spin.

    April 12, 2009 at 6:36 pm in reply to: Hotpoint Fridge Model 6936 Thermostat #283037
    lerch
    Participant

    Re: Hotpoint Fridge Model 6936 Thermostat

    Turn stat off ans see what switches what between terminals and 1 black is for the compressor overload the other black is for the interior light switch and brown is the compressor live.

    April 10, 2009 at 10:12 pm in reply to: Panasonic Washing Machines?! #282893
    lerch
    Participant

    Re: Panasonic Washing Machines?!

    I work for comet and not seen one of these yet. But will let forum know if I do.

    March 25, 2009 at 9:28 pm in reply to: AEG L14500VI Main module required #281287
    lerch
    Participant

    Re: AEG L14500VI Main module required

    I will try and did up an old file showing how to program. 😀

    March 25, 2009 at 8:34 pm in reply to: Bosch 154740 carbons- who’s the cheapest? #280739
    lerch
    Participant

    Re: Bosch 154740 carbons- who’s the cheapest?

    Some guy on ebay selling them Item number: 110362826423. DO not know how good they are.

    March 25, 2009 at 8:26 pm in reply to: diplomat adp4520 oven #281282
    lerch
    Participant

    Re: diplomat adp4520 oven

    Try maddocks on Tel. 01443743370. 😀

    March 25, 2009 at 8:25 pm in reply to: AEG L14500VI Main module required #281285
    lerch
    Participant

    Re: AEG L14500VI Main module required

    On zanussi website just listing one for front pcb and side pcb, if the machine has a display window should only take about 3 minutes. If not takes abit longer converting to binary but only about 15 minutes.

    Code should be 852C102ABA75B9E5.

    March 23, 2009 at 9:45 pm in reply to: Hotpoint WD440 Power Module Situation #281069
    lerch
    Participant

    Re: Hotpoint WD440 Power Module Situation

    When fitting this module to a product produced before serial number 61101.0001 it will be necessary to convert the J10 connection
    to J13 & J14 by fitting harness part codes C00142746 & C00142747. The module programme and function is not affected. 😀

    March 23, 2009 at 9:37 pm in reply to: Split fridge seals #281101
    lerch
    Participant

    Re: Split fridge seals

    Yes tell people to open using handles and not the side of the door. 😉

  • Author
    Posts
Viewing 15 posts - 91 through 105 (of 353 total)
1 2 3 … 6 7 8 … 22 23 24