lerch

Forum Replies Created

Viewing 15 posts - 61 through 75 (of 353 total)
  • Author
    Posts
  • in reply to: Comet Engineers #305339
    lerch
    Participant

    Re: Comet In Financial Trouble?

    All Comet engineers at my depot are fully trained in the use of both meter’s and mega’s.

    What they do in the field is there option as no one else is there…….. but if recall’s get to high a senior eng’s will go out and inspect there work and also go out with them to check there working practices.

    But what has this got to do with is Comet In Financial Trouble? ????

    in reply to: Whirlpool American Type Fridge Freezer Model S25DRBB33-A/G #303966
    lerch
    Participant

    Re: Whirlpool American Type Fridge Freezer Model S25DRBB33-A

    F1 is change filter.

    {e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} Litres Time Degree of wear of filter

    F1 1 > 1500 > 270 High (Change the water filter)

    in reply to: Job required #303200
    lerch
    Participant

    Re: Job required

    Also looking for engineers around the midlands. PM me with your details.

    in reply to: White Knight bearing pads/seals #302397
    lerch
    Participant

    Re: White Knight bearing pads/seals

    Check your in box. Service Manual sent. 😀

    in reply to: aqualtis #300611
    lerch
    Participant

    Re: aqualtis

    Out the top about 30-40 minutes.

    in reply to: Hoover washing machine filling while spinning #300527
    lerch
    Participant

    Re: Hoover washing machine filling while spinning

    Have you tried the heater as they give of weird faults?

    in reply to: Flavel Aspen 100 #300301
    lerch
    Participant

    Re: Flavel Aspen 100

    Just to make sure if you twist it together and then try it should work – but only as a temp measure DO NOT LEAVE !!

    in reply to: APP6403 #300260
    lerch
    Participant

    Re: APP6403

    Using fast freeze just by-passes the stat / pcb for about 2 hours normally therefore not likely to be temp probe.

    in reply to: zanussi zwf1237 e80 #299725
    lerch
    Participant

    Re: zanussi zwf1237 e80

    If circ pump go’s it normal takes out the pcb so check for marks etc.

    in reply to: Siemens Cond T/D Filter Light #299778
    lerch
    Participant

    Re: Siemens Cond T/D Filter Light

    Air flow problem ??

    in reply to: Bosch error code #299355
    lerch
    Participant

    Re: Bosch error code

    sensor is available as a spare part, look on the left hand side in fridge part number as per bosch website is :

    031733 Fridge and same for Freezer.

    Both changeable behind plastic cover.

    in reply to: Bosch Cond T/Dry WTL6106GB/07 – not dry at end of program #299567
    lerch
    Participant

    Re: Bosch Cond T/Dry WTL6106GB/07 – not dry at end of progra

    Are they using bounce?? as this can affect the sensor band try cleaning then retest.

    in reply to: Bosch error code #299351
    lerch
    Participant

    Re: Bosch error code

    E1 is normally the fridge error just look in the user manual to be sure.

    in reply to: Zanussi TC7102W 91672060100 #299356
    lerch
    Participant

    Re: Zanussi TC7102W 91672060100

    From memory is there a micro switch behind bottom flap right hand side which if faulty stops dryer from working ??

    in reply to: Bosch error code #299347
    lerch
    Participant

    Re: Bosch error code

    E2 shows high temperature in freezer section.

Viewing 15 posts - 61 through 75 (of 353 total)