Forum Replies Created
-
Posts
-
Re: HYGENA COOKER HOOD MODEL APP2516
Check the model number as go’s upto app2513 then jumps to app2520.
Part number for a APP2513 is W0000051 for pcb but this may not be correct. 😕
Re: Whats the most annoying thing customers do?
Last year I had to go to a problem call where 5 or 6 engineers had been yet not found or fixed the fault.
I went along found the said fault and then spent the next 90 minutes fixing it customer signed paperwork and I left what I thought was a happy customer.
The office then rang up her as part of our customer survey and she complained that I had been in the house to long fixing her machine, when asked if the she was now happy with the repair she said YES ❓ ❓
If only you could do this job without the general public, what a fab job we would all have. 😈
Re: The worst Cheneille i have ever seen Pics
Had it with a hoover washer.
Took the machine outside removed pcb’s, motor and pump then removed sump hose and turned on the garden hose and sprayed inside of drum took about 1 hour. Job done. 😀
Re: Hotpoint WD440 Just wont stop washing
If the heater is faulty and the water on the hot feed comes in at 50c and you want a 60c wash it is not suddenly going to start working just buy a heater and stop being cheap !! 👿
Re: Hotpoint WD440 Just wont stop washing
Try using a meter and check the heater and also the ntc. 👿
Re: bosch sgs45e02gb/56
Look at left hand side and find the chamber with float switch in and clean it / replace it also the flow meter can cause this fault.
Re: Smart or Stoopid
62.2{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} second time around 😀
Re: Hotpoint BWD129 Drum Paddles
in the middle there is tag that needs to be lifted up to about 45 degrees and then place paddle in the 6 holes and push backwards.
Re: Hotpoint CTD00 00 squeaks on every drum rotation!!
Check your cooling fan inside the machine.
Lid & right hand side panel off as you look at it and in front of the motor is a cover which pops off then take the fan off and tried for a couple of minutes and you should now have no noise if so just replace fan and sway you go. 😀
