Forum Replies Created
-
Posts
-
Re: Hotpoint TL71
doesent matter really which one goes to which there inseries 🙂 as long as the link goes to each stat…….
Re: CANDY CDI1012
need the full model number as theres 5 different types or product number
should begin with 329******phil
Re: RE AWI ltd
yes we got one to , rang them an explained that we had not recieved any second notice of payment , they waved the £40 charge , nice to deal with
aswell ………..phil
Re: Hoover HFI3015 Dishwasher
no not unless its a combi boiler and its close to the dishwasher, some times the hot watercan cause it to show a fault code ………
mail sent… 🙂 there is a couple of bulletins on the gias site that might be relervent to the problemphil
Re: Hoover HFI3015 Dishwasher
email addy please 🙂 And product code or serial number there is 2 versions
edit 3 versions lol
Re: Whirlpool dishwasher ADP7406 door will not stay closed.
bottom basket may be in the wrong way round ? has cought me out one or twice over the years :
Re: hoover vhd9143 zd80 motor fault
Inductor i goosed cut it out see iff that helps iff its a 3 fase motor wich i think it is ‘ hth
philThe Inductor, as depicted in Picture 4, is a
new typical component of the technology
needed by the Three-Phase Motor.
It is electrically connected in series to the line
of the mains, immediately after the main
ON/OFF switch.
It basically carries out the job of an antiparasitic
filter and is fitted to comply the
approval’s specifications.
In case it should become open circuited, one
the thwo lines of the mains is opened too and
the Washing Machine stops working. In such a
case, it can be temporarily eliminated, by
removing it and by connecting between them
the two leads of the wiring. Nevertheless, as soon as possible a new spare inductor
must be fitted onto the Machine, to comply with the original design and to prevent
that some noise generated by the Three-Phase Motor, could affect the good performances
by the Core Corntrol Board.
