Forum Replies Created
-
Posts
-
Re: Hotpoint Aquarius WMA33 Leakage problem
Tricky one to figure from the info given “two little plastic buttons?” 🙁
Where are they located specifically? A leak on final spin could even mean there is a split in the front door seal. Closer inspection with the power off the only advise I can give. We could well have a local independant in your area who could sort it for you here: Repairs@
Re: Knob!
Partfinder has it listed as 6225212 Knob & Disc Top Oven, so I guess we have identified the right part for you and Parts Center have 96 days stock of them remaining 😆
Re: Bish-Bosch dodgy wash! SGS 43A12 GB/27 Exxcel problem
No Brightspark, seems now you have all points covered and your 50 quid machine should work wonders from now on in 😀
Finish Dishwasher Cleaner and others?………..nah!….leave them on the supermarket shelf I would. Just top up the salt and rinse aid every month or so, clean the filters regularly and you’ve got it sussed!
Powder residue?…also not a problem and most likely caused through trying to wash a full load on a ‘quick wash’ or ‘economy wash’ cycle.
Re: Knob!
Goatboy wrote:Gen no. – 6225212 – This will do!
That part (Control Knob Disc) is available from stock at Parts Center, the other part is OBSOLETE 🙁
Re: Bosch Neff diswhasher looms
eastlmark wrote:while others had to be cut and shut.
Yeah, that’s the deal, but at least it makes a neat lasting job :tup:
Re: Bish-Bosch dodgy wash! SGS 43A12 GB/27 Exxcel problem
brightspark wrote:When I was checking the filters/screens, the “sump” water inside the machine was very murky indeed.
Thank you for your confession, clearly your sins will now be washed away as a result of learning that dishwashers clean dishes but have no ability to clean themselves, Amen!
😆Re: Bosch Neff diswhasher looms
eastlmark wrote:Anyone Bosch wise able to help?
There is a similar model wiring harness (Part No: 296101) still available. Not cheap at over £50 but can be modified to fit as there are sufficient wires to include all the connections you need?
Check it out on the BSH website (Fits Model No: S4132EW0GB/11)
I used to use the hotpoint ones but since Indes**t took over they knocked that on the head (as was Hotpoints no: 1800726) 👿
Re: Help With The FAQ
kwatt wrote:The old “E2” springs to mind
:con:
Here’s one though : –FAQ’s wrote:· Does UK Whitegoods sell spares?
No, but again we can reccomend companies that can do this.Re: AEG Wash M/c pnc 914001279/00
Blimey!
Taking a chance there Laurence I reckon, costly if it isn’t the Timer? Mind you the Tacho Kit is obsolete on this model.
Though it might be worth a call to QER to see if they can advise on perhaps looking at the old Timer at least? 😉
Re: HOTPOINT Aquarius WMA37 Putting holes in things!
The 3 turquoise coloured ‘Drum Paddles’ are renowned for damaging clothing, most likely at least one has come loose 🙁
Re: any 1 help with part number wpl481228268012 thermistor
lotusray wrote:cheers ray
Masterpart have them in stock, so too do Connect, is there a problem you are having that I cannot figure here Ray with your post? :con:
…and why post in the public forum anyway??? 😕
Re: Clean up the act time?
kwatt wrote:But yeah, can you try to appeal to his better judgement Martin?
We shall see?
Copy of PM wrote:Jim,
Your latest avatar has created a bit of a stir, sadly for all the wrong reasons in some quarters. Please could I ask you seek a more acceptable alternative, I could assist you in this regard should you require an animated avatar.
(You no doubt have seen many that I have created such as kwatt’s, Dave_Conways, the ‘Repairs@’ toolbox, the Shop@ avatar etc etc.)
Thanks
Martin
Re: Clean up the act time?
My long held views on certain ‘happenings’ on UKW seem to be affecting others then eh?
I feel better now having read your post Chris thanks, unless that is you are turning into a grumpy old git like me, but I doubt it 😆
I will PM Iadom over his avatar if you like.
Yurtesen?…now he understands the theory of his washer/dryer and the bearings haven’t turned rusty just yet, he will pop back again in a few weeks time I expect to ask Dave to source a new drum shaft….fear not :rotfl:
Is my ‘dashing white charger’ creating to much poo I wonder?
Re: Bish-Bosch dodgy wash! SGS 43A12 GB/27 Exxcel problem
Adrian,
Do ensure you top up the salt container when the salt light comes on, check and clean both spray arms very carefully under the tap.
Might be a good idea to stop the machine after its been running for say 5 minutes to check as to how much water is in the tub, it should be lapping the salt container cap!
