Forum Replies Created
-
Posts
-
Re: Bosch Disheasher : E14 Error Code :
Hanuman wrote:Hi Martin,
I just removed the left panel of the Bosch Dishwasher.
I know I have to remove the plastic cover to access the area where Reed Switch is by the water tank.
I removed the two middle screws.
Is it safe to pull out the cover now or is there any more ?Re: Replace Reed Switch Bosch Exxcel SMS50E12GB/16
Hanuman wrote:I also need to replace the reed switch..
Can you please explain to me step by step ?
I have removed the side panel and I see a plastic cover..Then just lift it out and pop in the new one as shown in the photos above. Easy!
Re: Bosch oven cooling fan stays on for hours
It will be B1422N0GB/03 most likely and yes will need the Module (00602739) replacing.
Re: Zanussi ZWF1000M Drain/Spin problem
It does have alarm fault codes based on a combination of wash, rinse and spin LED’s.
Re: Bosch Dishwasher SMS69L32GB80
Most likely to be the reed switch yes. Best order a couple to have one on the van I reckon.
Re: Bosch wft 2800
Jimmy A wrote:Also check for gunge all holes were clear no blocking.
I wasn’t referring to the soap dispenser but the air chamber attached to the drum. Often they can have gunge build-up that can cause intermittent errors with water level control.
Re: Bosch wft 2800
It’s a water filling problem. So either the inlet valve is at fault or the water level air chamber is blocked with gunge.
Re: Masterpart Ceased Trading
One less competitor swallowed up, more Trade price ramping and on-line sales getting more and more aggressive.
If Maddocks drop their guard it could be them next.
Re: Bosch SG143EGB02/16 salt problem
Unscrew the collar that attaches the manifold to the tub then lift the manifold out, up and off the salt container.
Re: Use sand not concrete as machine weight?
……and if you spill any loading it……
https://goo.gl/images/MyzRLWRe: Hotpoint df61 dishwasher "bang"
kwatt wrote:The heater’s not currently available Martin, it’s nil stock everywhere, both versions of it.
If it comes to it Ken this one will fit…..
https://shop.ukwhitegoods.co.uk/491755- … ng-element…….although we first need to establish what went bang 😉
Re: Hotpoint df61 dishwasher "bang"
paul243 wrote:Thanks all
Could you please advise how to access the heater and test it, do I remove the bottom plate.Is it a simple test for continuity?I told how to access the heater in yesterday’s post. Continuity test, earth insulation test and visual inspection are the way forward. 🙂
