Forum Replies Created
-
Posts
-
Re: Indesit WD12
Yes keng, the motor could indeed be one of the excuses these modules need to fail. 😕
Re: Salt in dishwashers
andy2 wrote:
Not perfect but its somewhere near.Andy 😀
Sounds good enough for me, Cheers Andy.
Re: Salt in dishwashers
Just out of interest, having read the “How water softening systems in dishwashers work” link in Kens post there is one thing I am a bit fuzzy about.
I fully understand the process as explained except for the fact that when the calcium ions are attached to the resins, due to the resin having a greater affinity for the hardness ions, why under the regeneration process do the hardness ions let go to be replaced again by sodium ions to which the resins have a lesser infinity?Re: Thank you …
Just got back from the Derby training seminar and would like to thank Rob Dray and UKW for all their efforts.
I found the detergents training very useful indeed and ISE section very interesting and exciting.
I would advise everyone who hasn’t already been to one of these sessions to grab the opportunity as soon as possible – you won’t regret it.
Thanks also for the free clothing and detergents,very nice.
Martin Williams.Re: Candid Cameras
Extra revenue could be raised to pay for them
What a surprise that the revenue they would make is mentioned 🙄
Re: Cheap Fuel?
Well I have registered, l also run a big van and I can’t see a problem with trying to reduce my highly excessive fuel costs. Thanks for the link Chris.
Re: HOTPOINT WMA 10 NO SPIN
Bit of a long shot, but what about the RF suppressor?.
Not had this problem on a wma, but used to get problems with the old servis quartz – computer resetting when ramping up to spin under load!Re: Washing machine not doing spin cycle
Totally agree with bassman on this one. Had loads in the past and got quite used to disconnecting the capacitor switching wiring at the timer and fitting a pair of capacitors tapped into the motor loom on the chassis. Makes a much more reliable job of it. 😀
Re: Indesit wd12uk, w103
megawatt wrote: What is CPC?
Regards,
Mike.Hi Mike, you will find them at http://www.cpc.co.uk/
I have just ordered some myself.
Cheers
MartinRe: Indesit wd12uk, w103
andy2 wrote:It is better to change the relay to make sure. At £1 for the part
Andy 😀
Andy, where do you source these relays from – and have you a part number please.
Cheers
Martin.Re: Safety Issue on Hotpoint Dishwashers
Martin wrote:
The Company have advised us that this was not a safety critical fault as when the dishwasher door is opened all power to the accessible exposed wiring is ,in fact, cut off and therefore there is no risk of electrocution to the user.So what route does the live feed going to the door switch take then?
Re: Dear Santa Claus…..
whiskeyjack6058 wrote:No more candy/hoover condensor tumble dryer repairs would be a nice christmas gift!
absolutely! 👿 I would also wish for Indesit to design dishwasher motors that will run under water 💡
Re: Electrical Safety & Legal Legislation
Tubs wrote:Find this very useful, quick and easy to use.
(PDL 200)
http://www.socketandsee.co.uk/Steve
Thanks for this link Steve. I have sent for a PDL200, looks like a very useful piece of kit.
Cheers, Martin
