[Martin114]

Re: Water pithering out of my ISE10 drainpump! :-O

has the pump drain tube been fitted back on the filter door?

[Martin114]

Re: Lg tumble cuts out

I had one of these with same fault a while back and it turned out to be the motor toc. new motor cured it.

[Martin114]

Re: Bosch WVT1260 steaming

its not connected to hot supply instead of cold by mistake is it?

[Martin114]

Re: Carbon brush wear

It only seems to happen when the motor is controlled with DC so I would imagine the current flow from the positive brush toward the negative brush is “giving up” material ?

[Martin114]

Re: Hotpoint DWF 30 Control Module

Ah, I was thinking it was a module change. Oh well.

[Martin114]

Re: Hotpoint DWF 30 Control Module

I think the dwf30 was part of a recall a while back

http://www.hotpointservice.co.uk/appliances/dishwashers/safety-notices/

[Martin114]

Re: Bosch Dishwasher No Water intake

I should check with the FD number if this model is part of the recall for the module.

[Martin114]

Re: Beko wmb91142lw

Thanks for replies Lawrence and Andy. i think its motor as well but don’t think customer will proceed looking at costs.
Martin.

[Martin114]

Re: Beko wmb91142lw

Did you sort this one Andy, only I have one with same fault and can’t find reference to a diode in the parts list.
Cheers,
Martin.

[Martin114]

Re: LG F1247 TD washing machine

Could also be blockage at bottom of pressure switch hose

[Martin114]

Re: Bush WQP12-9348 Dishwasher door lock

Looks like a Midea 673001800513 lock

[Martin114]

Re: ISE w288eco – Drum banging + Cycle doesn’t finish

might be worth checking for blockage in the pressure switch hose where it joins the sump hose.

[Martin114]

Re: Beko tumble dryer NTC

thanks for the info Dave, Very much appreciated.
All the best,
Martin.

[Martin114]

Re: Beko tumble dryer NTC

Yes I did put damp cloth across sensing strips but still no good

[Martin114]

Re: Beko tumble dryer NTC

Did you find this was an ntc? only I have same model to repair where element resistance checks out ok at module end, tried module but still no heat.
Martin.

[Author]

Posts